Super Jet bilge pump?

[brylon644]

Just bought my first sn sj and think that a bilge is the first thing im going to do. What do you guys think is the best kit for a 91 and whats the best way to install.


thanks

 

[RedTurboMr2]

Buy one or two Rule 500 bilge pumps, one or two bilge fittings, some tubing, OCD Solutions wiring kit and a switch of your choice. Very easy to install, it's straight forward once you have everything in your hand.

 

[Sanoman]

How much do you want to spend?

RedTurbo gave you some great advise (he gave you the best way to do it) but "cheap man" mod will work for your first one.Walmart.....They have bilge's,hose and maybe an outlet.You could pick up a cheap plastic outlet.The only other thing you need is a switch.Depending on where you will run your ski (fresh or salt) just go down to ace hardware (or maybe walmart) and buy a cheap switch with a rubber boot for the outside of the switch (fresh water) and wire it up.

Cheap but it will work for the summer.

 

[wanderer1]

Also a single Rule 500 should be adequate and is easier on your stator than dual pumps. Hood mod is also a good idea, don't have to pump the water out if it does'nt get in. A good hood seal helps too.

 

[iangdesign]

Can't stress a bilge enough in a SN! A buddy did 4 subs in a row came back in and the engine bay was half full or water. I have a single 500 Rule in mine and it keeps water out very nicely! Not running the stock siphon bilge.

 

[djkorn1]

[video=vimeo;46853698]https://vimeo.com/46853698[/video]

No switches! EVER...

 

[Hagan]

I'm using a dirtbike kill switch for my bilge switch. Its worked very well but you have to hold it down in order for the bilge to just. It was around $10.