chrisdoc0608
insulting
- Location
- rocky mount, nc
http://www.rivayamaha.com/RivaStore/product_page.asp?Category=PMC Replacement Yamaha Motors
price is pretty cheap, and no core required.
price is pretty cheap, and no core required.
are these good motors?
- Thread starter chrisdoc0608
- Start date
- Location
- Clearwater, FL
Read this and then decide:
http://www.pwctoday.com/showthread.php?t=140402
I would probably wait to see if they are still in business before buying one.
http://www.pwctoday.com/showthread.php?t=140402
I would probably wait to see if they are still in business before buying one.
chrisdoc0608
insulting
- Location
- rocky mount, nc
thats what i figured
oxnard111
Creative RE Purchasing
- Location
- so Cali, Ventura/Oxnard area
i have ran a pmc engine that came in my first superjet with no problem, but it is still in bone stock form. just my only experience.
WFO Speedracer
A lifetime ban is like a lifetime warranty !
- Location
- Alabama
I did two of the Seadoo replacement engines about two years ago,on one the front crank seal went out on the other the center seals went out,one intersting thing is that they had .75 o/s pistons in them,I don't know why these are supposed to be new engines.They did make it out of warranty ,just barely.I also installed a 650 reman in July.it lasted an hour before it blew,I was riding it when it happened.it didn't over heat,50-1 ratio premix + stock oil injection,never ran it past half throttle.I wouldn't touch these with a ten foot pole right now until the smoke clears on who is going to pick up the warranty.
wetjet701
Always On
I have one and it runs great I bought the 760 when it arrived it was a 62t 701 with 84mm flattop pistons? this was bored to a 760 called to ask about it and they told me they had alot of extra pistons laying around so they just built motors with them all at the time were diffrent setups anyways it's been running strong for about 2 years now but with all motors correctly follow the breakin and you'll be these have a rough breakin 1 hour idle at a dock or in a tank 10hrs at no more than 4000rpms then 10hrs varying rpm but never a constant full throttle then have at it