64x 760 advice for ignition mods

Hi all, I didn't get much help on this over at pwctoday, but I have a 64x ignition and was wondering if I can do any mods to it, I know it fires the cylinders differently etc and it hurts performance afaik. I already have a newmiller lightened flywheel. Can I do any mods to the stock components for performance? Also what I would really like to know if if I can hardwire a msd ignition cdi to the 64x box.
Thanks
 
The MSD Enhancer can only be used with 6M6/61X and 62T stators and flywheels. Best bet for modding is to switch to one of those setups, can't do a whole lot with the 64X setup...


Sent from my iPhone using Tapatalk
 
Location
denmark
Ther is a complete ATP flame setup in the for sale section, best ignition mod too any engine. And you Can sell you owen ignition
 

Quinc

Buy a Superjet
Location
California
You can get a 61x flywheel and stator cheap, then use an msd enhancer. ATP or MSD total loss would give much better results though.
 
I might have to get into a total loss, I started building the ski on a limited budget, now its ported, high comp head, dasa dual 48's, dasa Mani, vforce , so I know my lightened 64x flywheel and stock e box will be limiting, I just had it lightened too I didn't really want it to be for nothing lol
 
Location
denmark
Whit the TL you a also ready when you wante a bigger motor, i run the ATP flame and Will never goe back. Its like putting on another B pipe better starting when cold fast revs and you Can make your owen curve on a PC. And it fits the stock ebox Well worth the dollars
 

Ducky

Back in the game!
Location
Charlotte, NC
I would run 62T electronics (stock charging system) with a lightened flywheel and an ATP epic. Will be cheaper and more user friendly than going Total loss.
 
Top Bottom