I have 2 1990 superjets and a pile of parts for sale. The skis were winterized 5 years ago and haven't been used since. I put fresh gas in them and ran them on the hose for about 5 minutes, but they could probably use a carb clean and fuel pump kits before actually using them, both need batteries. I would like to sell everything together but I will consider offers on them separately. $5,000 OBO for everything!
Orange one-
62t 701 engine
165ish PSI on both cylinders measured at 5,500ft
Factory B pipe
Jet Maniac freestyle ported cylinder with around 10 hours on it
ADA girdled head w/ 35cc domes I believe
MSD Ignition
Hooker impeller
Worx Intake grate
Aftermarket handlepole and handlebars
Scupper
Footholds
Black one-
Stock 650 engine
130ish PSI on both cylinders also measured at 5,500ft
Worx intake grate
Jet dynamics rideplate
Scupper
Footholds
The Pile of parts-
48mm mikunis
2 61x cylinders both could use a fresh bore or maybe just a hone. One is a jetmaniac freestyle port the other is ported and polished, cant remember by who.
62t case
88mm nozzle with trim
Jet Dynamics rideplate
Steering cable
Roundnose handlepole and bracket
Squarenose handlepole, handlebars, and bracket
Factory electrical box with all components
There is also a separate 6m6 engine that I believe is all there with cut stator wires. Would need new gaskets and cases sealed to be used again.
All of the other random junk in the pics is also included!
Skis are currently in Joseph Oregon but I come to Boise Quite a bit.
$5,000 OBO!
Orange one-
62t 701 engine
165ish PSI on both cylinders measured at 5,500ft
Factory B pipe
Jet Maniac freestyle ported cylinder with around 10 hours on it
ADA girdled head w/ 35cc domes I believe
MSD Ignition
Hooker impeller
Worx Intake grate
Aftermarket handlepole and handlebars
Scupper
Footholds
Black one-
Stock 650 engine
130ish PSI on both cylinders also measured at 5,500ft
Worx intake grate
Jet dynamics rideplate
Scupper
Footholds
The Pile of parts-
48mm mikunis
2 61x cylinders both could use a fresh bore or maybe just a hone. One is a jetmaniac freestyle port the other is ported and polished, cant remember by who.
62t case
88mm nozzle with trim
Jet Dynamics rideplate
Steering cable
Roundnose handlepole and bracket
Squarenose handlepole, handlebars, and bracket
Factory electrical box with all components
There is also a separate 6m6 engine that I believe is all there with cut stator wires. Would need new gaskets and cases sealed to be used again.
All of the other random junk in the pics is also included!
Skis are currently in Joseph Oregon but I come to Boise Quite a bit.
$5,000 OBO!
