Search results

i know they make those really nice billet handlepole brackets to change your pole on a square to a roundnose pole, however i was wondering if i got a stock round bracket could/would it be feesible to mount it on a sq nose? any help would be great..

like the start stop switch, also ground wires can play funny tricks on you.

it would'nt be the first and it won't be the last i think if you like the hood and its gonna serve its intended purpose, go for it!!!what could it hurt? i have found that most of the time the so called "knock off" is often the best deal... just my opinion

well winter time here just means snowirds, and winter waves! i guess we'll say goodbye to those calm summer mornings! see below:

65m.p.h. yeah only if it was dragged by one of those bad a$$ river rocket boats!!:bs2:

yeah, what john said, on my old 650, i put a factory pipe on it (off of a 750sx) it had a westcoast on it beore but could'nt come close to the power the factory pipe made. single 44 mikuni is also a great setup. i had the exhaust ported slightly and that also helped. i had compression of 165...

i got the same one and recc. for the same reasons, plus i've gotten a xl1200 on it a couple of times and it holds great

:haha: nice! sorry one finger typer here, thats supposed to be better, thanks for pointing that out.

go for it man! long story short, i was in a motorcycle accident in jan 2006 and fractured my back and other minor injuries, it laid me up for almost four months. well i ended up gaining 30lbs. i'm 5'9" and i weighed 185. since i got the clean bill from the doc, i've gone back to the gym, and...

just recieved my waterbox from him and item was beeter than described!! the shipping was very fast and the communication was great. i'll be sure to look you up again if i need something else!! thanks bob!:biggthumpup:

dumb ? are you running dual cooling? my kaw is set up with it and i got the bottom screw cracked top about 3/4 to 1 and middle screw closed seemed to work great. also put a 2.0 needle seat in the line from the top of the head to the bypass it will slow down the flow in the head and change the...

complete scam!! was this in your e mail or my messages in my ebay? if he won the item he will send you a request for payment. if its generated from an ebay acct it will show up in your my messages not just your e mail.. report it to spoof@ebay.com.. good luck

well i've been in the keys for the last week, i get home today, booted up the computer and no X !!!! wtf!!! freaked me out until i tried it a little later.:scared:

when you pull the carb off and apart, the easiest way to make sure you put it together correctly is to lay it out piece by piece on a clean work area. the diaphram is most likely the culprit if it is infact a carb issue. (sounds like it is). if its stuck to the cover or brittle, replace it. if...

i'm soooooo bummed that i could'nt make it. i won't bore you all with lame a$$ excuses. sounds like you all had a great time. i'll be ready for the next one....

i've used this product for years also the dealership that i worked for used to repair huls and anything smc or vinyl. i believe your hood is the same thing as smc. its an epoxy from this company, http://www.winzerusa.com/ they used to make two types. one was 2-3 min work time the other was 8-10...

if you have mechanical experience. i put a factory pipe from a 750sx in my 650sx. not positive but you should be able to make it fit in a x-2. you'll have to modify the chamber some(i dented mine in a little as possible). then cut and rewelded the pipe that hooks to the waterbox. i have to tell...

i ordered the side lifter wedges from hydro turf. they come peel and stick, however i reccomend you clean the area with acetone first. also you may want to sand and form them so they look nicer and don't get in the way so much when you move your feet around the tray, also so they won't pop off...