Search results

Seems to me that the thread you have linked above is your best bet for help. As the author of that thread.

I just might do that if my Pismo plans don't pan out.

I have my set of tub II's in the garage new in box, just haven't put them on yet. Ducking and Running!!! I know i need to put them on, have just been lazy, and have too many other projects.

Mine came with the hardware blowsion provides, but I have heard that most think that the hardware from blowsion are not long enough for some of those though angles. I think they are just pan heads. If you use filler just sand it down after your done, before you paint, if you are going to paint.

x2

Thats all that counts right? I purchased the same bag of zip ties, but I think mine was 1000. That bag will last a very very long time.

What about the waterdawg plate? Its not full carbon, but still looks just as good and is loads cheaper....

I know that finding a set of stock single carb OEM Yamaha flame arrestors is my best bet, but I don't feel like forking out $80+ for them. Just wondering if any of you have experience using stock OEM kawasaki 550/550sx flame arrestors on your SJ, SXR, etc? I might have a couple lying around I...

Cool. Thank you very very much for trying that for me.

I agree with you there. I just used the set of disc that came with the pile of a dremel kit I received as a gift.

It took me a while but I just used a dremel also, just with a standard cut off disc. It took about 6-7 disc's, but it worked out pretty well. Then used the drum sander to smooth out the edges. Didn't have jigsaw, other wise I would have used one.

Only comes in grey and only comes in diamond.

i like

Sweet, LBE and Ross are all hard up on you now. Haha. J/K

Like I said I'd really like to see it when you get further along. Sounds pretty dope.

I used grease on the pump seal

i'll look forward to that

Just wondering if anyone would happen to know if the Flame arrestor screens from a stock dual carb Flame arrestor (like a stock 62T setup) will fit into a single 44 stock yamaha flame arrestor unit? Here are the part numbers for both. They look similar in shape and size on the microfische, but...

my thought exactly. what are the odds? But your still cool Premix haha:cool2:

Stock shortened pole -3.75. I'm about 5'8" Rickter footholds placed as far up as possible just stoping before the exhaust tube. Still getting use to it, really starting to dig it. Switched a from a standard length pole from last season to now.