Search results

Western Power Sports sells the outer housing in 50' rolls, it can be had in 5,6 or 7mm, they also have the ferrules to go on the ends, inner cables, adjusters , cable ends and cable stops.

Search function must be jacked up again, I could have sworn there were pages upon pages of Wetjets backflipping and doing sweet barrel rolls.

Carry on X-H2O KNOW IT ALLS

Disclaimer: As with any tool the use of sandpaper requires some degree of intelligence, if you do not possess the required level of intelligence please refrain from using sandpaper. Personally I have never had a base gasket leak , so that being said either I am damn lucky (after building...

Granite surface plate, is this guy for real ? Do you have any idea how long it would take to move even .00010 of metal with a wetted out piece of 220 grit sandpaper ?

Knock off what you can with the razor blade, then use some 220 sandpaper and mineral spirits to remove the rest, you can also wrap the sandpaper around a piece of wood and go at it,you are not looking for a mirror finish by any means, just make sure every bit of the old gasket material is removed.

Jettrim makes nice stuff, its not what most people here use but then you are not most people are you?

It sounds like you are replacing the only component that has anything to do with the engine running, that being the CDI box, you are good , go with it.

Does this post make sense to anyone else? just checking

I have also seen this once on a brand new Kawasaki X2, ran great on the trailer, as soon as you dunked it in the water it went down to one cylinder, it was also a pinhole between the cooling going right into a transfer port. I ended up taking the cylinder off, plugging the cooling off and...

Me and Gil had this discussion yesterday, most people don't know that the engine heats up the spark plug, not vice versa, spark is neither hot, nor cold. BR8es-11 is the same heat range as BR8es but factory preset for a wider gap, try a set of BR8es plugs in there, unless you are running total...

How much for the pump tunnel, that would be the ticket for 300sx builders

This is shaping up to be a pretty good size ride ,drawing members of of three different sites.

Do you know how to keep an X-H2O member in suspense forever?

He must have really cushy shoes he rides with, my feet hurt just looking at that.

First come out on the low speed adjusters about 1/2 -3/4 of a turn and see if that helps, if not you may have to change popoff springs for a lower popoff pressure.

speedracerptcrw@yahoo.com

Melmack did you get the engine mount I sent?

I have one just like it here except that it broke the side all the way out and the starter was sitting at about a 30 degree angle.

Guys like you keep me plenty busy.