Search results

http://www.amazon.com/dp/B000I1LU0A/ref=asc_df_B000I1LU0A1662733?smid=ATVPDKIKX0DER&tag=pg-815-95-20&linkCode=asn&creative=395093&creativeASIN=B000I1LU0A

You do realize the jetting is way off if you put a 650 carb on a 750 right , don't run it like that or you will seize it up for sure from being too lean.

No it won't work, the 750 cylinder liner protrude into the case, the 650 cylinder liners are flush plus the piston pins are different sizes, 650 has an 18mm pin, 750's have either 20 or 22mm pins

Yes its called closed throttle runaway, you probably have an air leak which explains the scoring of the cylinder.

I would say by the time you buy the materials for the molds you are looking at spending around $2000.00, a lot of people tend to forget to add in all the throwaway items, boxes of brushes, fiberglass rollers,gloves, tyvec suits, rolls of plastic to contain the resin spillage, mixing sticks ...

You really haven't given us enough info for anyone to answer your question, answer the following questions and you will be a lot closer to your answer. Are you using any type of core material or will it be solid carbon fiber ? Are you using Epoxy resin or vinyl ester resin ? How strong vs...

Send it to SBT they weld anything

Sorry sis I believe I have more experience speaking jive than you do

Sheet dawg cain't blame a brother fo tryin

Sorry I live in Alabama, I have to know how to speak Jive, hey we now know a language we can talk in that Suzi can't comprehend, I am gonna have some fun with this . Yo beesh howza bout we go back to de crib and break the wood. you down ?

They are the screw on type spit on them and screw them on the wires , they screw on about 1/2 to 3/4 of an inch, if you will look closely you will see the screw inside the wire end of the cap.

You two probably already have, keeping in on the DL I see,no problemo I am down wit dat ! I don't know I seem to remember you and Fox and something about a vacuum cleaner hose, I never got the dirty details.

Its just because you have hot flashes everytime he gets near you isn't it?

Yeah I am not sure who actually did it, it wasn't me, a guy pulled up wanting to sell this ski for $100.00, I bought it knowing it was toast, I figure the jet pump , cases and cylinder are worth that much, I took off the seat and found that contraption and was like WTF ? :love:

that is freaking awesome ! Speaking of ghetto fixes, I was looking for a WRlll coil a few hours ago and some fool has externally mounted a lawnmower solenoid up on this WRlll, he was using one of the electric box screws on the back of the box to hold it up, brilliant !

I will take the nikasil cylinder all day long and $250.00 is the retail price for a replated cylinder, dealer cost is quite a bit cheaper

Hell yeah who needs MSD LOL

You should be in the repair biz for a while, I see it all, the best one was the Kawasaki 750 SS I bought for $100.00 apparently the stator or CDI puked in it, so someone mounted a 4 banger car distributor where the oil pump was at and ran it total loss battery coil, the distrubutor had two...

Fubar Call SBT order a motor, install, sell in that order

1/4 OD. Mcmaster 52545SS38Gap-Free Pinch Hose and Tube Clamp 15/64" to 9/32" Clamp ID Range, 13/64" Band Width. :sneaky: