Search results

Just reinstall the stock rails. Mark44

Do not wrap them cut at a 45 degree after they are installed but if you want to do yourself a favor don't turf the entire rail just put a 24" strip on top of the rail where you may need it. Mark44

The cool kids have kickstands! Mark44

I am a mechanical design engineer working in the food and drug industry. The main company I work for is Sara Lee store brands. I left the company about 9 years ago and still work on their projects full time I have been doing this for 19 years and still don't know what I want to do for a living...

Very cool keep the pictures coming. Mark44

I actually cut the stitch that held my buckles in front and moved the buckles to the side on my Obrian vest. Mark44

p I know I can get this locally.

t O yea I know this just looking for brands being used then I will make my judgment. I do know I can get Maxima locally.

I always go CGA on a vest. It matters when you are knocked unconsious floating in the water that is why they are tested and approved. Its not a fashion show out there, IMO Mark44

Ok lets talk smoker oil I need to find an oil for in these two KTM's right now they are running on my Pennzoil 100% synthetic 40:1 jet ski mix should I change? :dunno: Mark44

http://www.x-h2o.com/threads/15259

In the future A good way to keep the bubbles out of your epoxy is to first mix the epoxy and hardener with a round stir stick not a Popsicle stick or pint stirrer then to take it a step further is to pull a vacuum on the mixed epoxy container for a few minutes. Mark44

o Great link Thanks! Mark44

I have not done that yet but that will be the first thing I do. I have the KTM manual on the bikes so I was going to follow that for now. I also need to pull Katie's rear spring and replace it with the stock spring. Mark44

Yes if you bought a kit you will have extra parts left over not sure exactly what parts but you will have some. This is why I buy my kits of John at Jet Ski solutions he custom makes the kits and only sells you what you need. Mark44

p O ok I thought you were running synthetic. :biggthumpup: There is so much info on that site it is mind boggling. My next plan it so set up our suspensions I still am trying to understand all the suspension info. Mark44

Hey Nick. I was doing a little reading on KTMtalk.com and they recommend Rotella T non synthetic in the gear case. FYI I don't know if it matters just thought I would post my findings. Mark44

p Thats is exactly what we did wrong we stared at what we didn't want to do and did it other than looking ahead and down the trail. Again great tip! Mark44

o LOL and I got to see it happen. LOL But I give you props you didn't freak out you kept the bike up and under control and rode it out. Mark44

I was in the center of the berm turning left and just lost all concentration so I decided to ride over it and out. Front tire went over the berm bike got centered on the top of the berm in the sand. Front tire in the air back tire in the air and me off the bike in the air. Mark44