Search results

Bumping this back up to the top, I am pulling a Gil on this one, no camping for me, hell I live less than 20 minutes from there, way too much work for me. I will be at the boat ramp no later than 10:00 AM , if you want to ride ,come on I do have one question original site or Alex city boat...

Same here Zig, its all good .

Here is the way I do it, get a 1/4 copper lug for the size wire you have, I use needle nose vice grips to hold it and hold it over a propane torch, heat the lug up til the lug melts the solder, melt solder into it till its about halfway full, very quickly take the end of the wire that you have...

These are race carbs , they will never work !

A lot of people in various sports have made their own systems using the Microsquirt technology, not nearly as complex as the OEM systems, its doable if you want to do it. http://www.diyautotune.com/catalog/microsquirt-module-v22-p-381.html?osCsid=0d9bd01aed155af9e06300d8b5d3027f

Bushing has to come from a Kawi dealer, no it can't be removed without destroying it, no real way to measure it as its a split bushing,measure the hole it goes into and the shaft diameter for the size, best bet order one from a kAWASAKI DEALER

The OEMS didn't want to sink that kind of money into what they deemed a small percentage of a shrinking market. Seadoo had some setups that would have worked off of sleds,E tec setups, but their halfassed entry into the stand upmarket failed miserably, the way the market is going another...

Looks good since its black ever thought of using tooling gelcoat on the bottom, very tough compared to standard gelcoats.

About 400-450 degrees, set the cylinders upside down on a couple of bricks so the liners can slide out, I would move it outside to the grill unless the old lady is gone for a week.Tap the liners with a mallet, plastic hammer or dead blow hammer or a block of wood and a hammer, if they don't pop...

here

I believe the order in question was for a Kawi carb Kehin to Mikuni carb adapter, It was shipped to my business address , maybe it was quoted as shipping and handling,it just seemed rather excessive to me for an item that weighed less than 1/8 lb. Like I said I was kind of thrown for a loop on...

You have a point there, I would take a few days of lockup in exchange for a a few trillion dollars.

John I have had several dealings with you in the past and your service is excellent, however I feel I need to bring something to your attention. I feel the $14.95 handling fee is excessive, Yes I know what is involved in shipping and handling and I personally hate dealing with it myself. But...

Would I take 8 Russian models on a ski trip to the Alps ,hell yes I would, I could do without the incarceration by the French police though.

I saw some pics posted of his flywheels on PWCT, excellent looking work, and shiny lol

The styrene in Polyester or Vinyl Ester resin is what eats the styrofoam, styrene monomer is a solvent used in the manufacturing of poly and vinyl ester resins, the polyester or vinyl ester is dissolved in the styrene monomer to make it into a liquid form otherwise known as a resin.

Okay so now its a catamaran hull, I will start calling you Katman, hey Katman whens the boat gonna be finished lol

I rarely see Josie sleep during the day, she does sleep all night long though, I should have named her Shadow because you can't take a step without her following you, Dachshunds are very social and very aggressive.

No

I have no idea, stock reeds in perfect shape, no apparent flaws, damn thing drove me to drinking, well at least thats the excuse I am going with.