Search results

I was reading some TXDOT or DOT code for markers and such. I think it varies by state, but at a certain weight it is required for trailers to have brakes. I know I do not reach anywhere near 3000 pounds (MI), but in the Houston area it is sometimes unavoidable to slam on the breaks. I did...

I am thinking about doing the same as my markers (amber lights) do not work. What I plan to do, which is probably overkill, is solder the wires together, seal with liquid electrical tape, and heat shirnk to make it sano. I would like to install electrical breaks now that my car has the option...

When I go to install the bolts, I only get about 1/4 of the bolt in where I get big resistance. What to do?

I took the pump off my '05 SJ to replace the stock inpeller and to install my WW FS cone. When I went to install the pump, I guess I did not get the right angle on the forward bolts and jacked the threads. This is the first time I have ever jacked the threads when removing a pump. For the...

Glad I could help :)

It may be an FX1, Take a ruler or micometer and check the inner diameter: 144 SJ 142 FX1

Thanks, I bought a craftsman 1/8-27 (Pitch is .27 NPT & .28 BSP), and tapped the manifold last night. I think you use a 5/16" drill bit. PAGE 3 of McMASTER CATALOG: While NPT threads are common in the United States, BSP threads are widely used in many other countries. There are two...

Checkout my new Boat+Aqutrax Trailer Shadow trailers rock:

What is the thread count so I know the correct tap?

In conclusion: Cooling Systems - All of our kits include cooling system modifications of one sort or another. The following is our in-house terminology for the different types of cooling systems. "Controlled" System" - This refers to a cooling system whose total volume ability is controlled to...

Do you use a 3/8 barb x 1/8 npt from the manifold?

Awesome!!!!!!!!

Might make it on Sunday, again w/o a ski. I will bring a suit this time, and the dog to hang for a while. Keep us posted.

Bath water?

Werd. :afro:

Blueprinting a pump SBTontheWeb.com > Forums > Tech/FAQ > Pump Blueprinting Instructions Good winter project if the pump is already out, can also help with better hookup.

All urethane (sp?) hoses will harden and/or discolor and only the only hoses that will not harden are Tygon & OEM/Rubber (Pep Boys, NAPA, etc) hoses. Drawback is they do not look as sano. If you compete or have a race ski I would pick up 25'+ of urethane hose so you can inspect the lines (and...

Skywalker = Luke Schneider

TYPO!!!! MY BAD!!!!!! call101032@aol.com

PWCT: GREAT tool for foam removal (footholds) - Use a die grinder and a shop vac PWCT: Fun Fun Fun!!!!!!! - How to access the foam (photos) AND a sano job with reinforcement and turf. PWCT: Waterlogged foam? Ha, I scoff at your measly wet foam. - Possible reasons for wet foam. PWCT: Wet...