Search results

Yeah man, thanks Do you have anything my size? Around 5'9" 190lbs

Went to start my ski the other day and couldn't get it to fire, after cranking for a while a bunch of fuel came out of the exhaust Found out later on that the primer was bleeding down the carbs and letting the fuel system de-pressurize through it, Anybody experienced this? Just a bad primer...

Anybody have a Wet/Dry suit they want to get rid of? I am about 5'9" 190 lbs looking for a suit, thanks in advance

thanks but I have a spare already

My ring gear seperated from the flywheel, any good ideas to prevent this in the future? Is this a common failure? Anybody have experience with this? Does this happen with the larger engines? Appreciate any input, thanks

Thank you for the help, you nailed, re-did the boot and it looks like it is back to normal, thanks again

Hi Guys, hoping to get some input to save time with repairs. Have a weak spark on only 1 cylinder in my ski, it is weak enough it doesn't spark under pressure , when trying to ride but spark is visible if you pull the plug and visual test the plug. Color and intensity of the spark is...

* B pipe gasket - it has the center exhaust hole and 3 mounting bolt holes around the perimeter *An intake gasket, the one that is below the dual carb combing plate, it has both intake holes and the then 4 bolt holes around the outer edges, shaped in a slight v-shape Also would you have the...

Hi Chris, was wanting to see if I can get some parts: *Need a midshaft rebuild kit for a Jetmanic housing (bearing, seals and orings), can I get the Koyo brand *The rubber dampner between the two midshaft drive couplers *A Thrust trim cable replacement

Awesome thanks

Hi guys looking for some input on how to deal with broken fuel tank anchor. Mine has pulled up. What's the best way to repair? What epoxy does everybody like? Any tips for the prep work? My hull is carbon fiber, does that change the epoxy type needed? Any feedback would be great.

You were right sparkplug, I bumped up the pop off and it finally stopped! Thanks for the help and appreciate everyone input! You guys rock

Appreciate all the suggestions and help I did try drilling the carb returns and tried several jets sizes, however the 1 carb is still leaking out the top. Any other suggestions? Anyone one what causes this leak? The fuel dripples out from the small tiny port holes around the circumference of...

Looks like my problem is most likely fuel pressure, my returns are not drilled Got some jets on the way, any suggestion on what size to start with? The return line off the carburetor is always the upper?

Thanks for all the info, Am I understanding it correctly? that you can place a restrictor inside the carburetor or on the return line to the tank? Either works? Does anyone know if the blackjack carbs are typically drilled or have any restrictor modifications? Where do people typically...

thanks

I have not check fuel pressure, is there any specific way the is best to due this?

Thanks for all the ideas and input. Tested my pop off pressure both are close to 26psi. Should I raise this up to a higher pressure? I doubled up on the anti-siphon check valve Has new needle and seats 2.0 size I'm at a lose, not sure what else to try, is there anything else to replace or...

I disconnected the primer but looks like the fuel is coming out of the small ports around the venturi

Sorry I am newer to this carb style -what is the anti-siphon? is the anti-siphon the clear plastic plate screwed down on the backside of the kidney piece? looking at the mikinu manual - is it part #12, the checkvalve on the back of the kidney piece? the drippling is not enough to make a...