- Location
- Marshall, AR
I ripped one of my boots yesterday, can you go with a aftermarket boot for yamahas? I priced them on a oem online webpage and they were $40 a piece....
Spark plug boot for a 701
- Thread starter tnj4life
- Start date
SUPERTUNE
Race Gas Rules
- Location
- Clearwater Fl.
Use MSD plug cap boots if using resistor plugs or use the NGK TB05em boots for non-resistor plugs.
- Location
- Marshall, AR
Thanks!!! Do you know where to buy those ngk boots?
Last edited:
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
you can go to NAPA and pick up some boots with the crimp ends (same type that MSD uses) for little of nothing.
#ZERO
Beach Bum
- Location
- Florida - U.S.A.
- Location
- Marshall, AR
I didnt know that. I'll see what autozone has tomorrow. Thanks bk.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
I have never had luck at the Box Stores (Autozone, Advance, Orielly's). Everything they sell comes in a Box, a Kit. Rarely do they sell individual parts.
NAPA does sell individual parts. That is why I only mentioned NAPA.
Kennay
Squarenose for the _____
- Location
- Myrtle Beach, SC
After using a few, I like the MSD boots with the keepers myself.
Mouthfulloflake
ISJWTA member #2
- Location
- NW Arkansas
IVe bought them before at Oreilly's auto parts.
good boots, with crimp ends.
about 80 cents each.
I crimp and solder the ends.
havent had one fail yet.
good boots, with crimp ends.
about 80 cents each.
I crimp and solder the ends.
havent had one fail yet.
TB
NOTHING IS EVER PROMISED
- Location
- Grand Rapids, MI
why dont you just buy a set of msd wires and slpice them together
Mark44
Katie's Boss
- Location
- 100% one place
X2 crimp and solder is the way to go!
Make sure to use the proper crimp tool.
Mark44
Last edited:
- Location
- Marshall, AR
Your right bk, autozone didnt have one. I didnt have a chance to go to a napa or oriellys, but I went to the local guy and he has a universal 90 degree cap that kinda looks similar to the ngk one, it will be in tomorrow. I think its for mowers. Its like a dollar. I think im on the same page as you mouth and mark, I could go with the msd wires but I need a quick fix.
Last edited:
Mouthfulloflake
ISJWTA member #2
- Location
- NW Arkansas
the last time I bought one at Autozone was a long time ago ( few years maybe)
and I bought a single plug wire for a GM I think, had a plug boot on each end.
I just removed the ends, and reused them, they are only crimped, so it was easy.
I dont have any fancy crimping tools either, I use Vice grips. ( im sure the tool would be easier!)
:bigok:
and I bought a single plug wire for a GM I think, had a plug boot on each end.
I just removed the ends, and reused them, they are only crimped, so it was easy.
I dont have any fancy crimping tools either, I use Vice grips. ( im sure the tool would be easier!)
:bigok: