How did you install REV's in your superjet?

[wjelmer]

How did you deal with the exhaust pipe when installing your REVs in your superjet?

I would prefer not to lower it and I already cut out the sides and it 6 inches for the back of the ski.

Thanks,
Willie.

 

[Matt_E]

I notched the front of the hold to make the pipe fit into the front of the hold.
Then glass over the hole.

 

[#ZERO]

That's the cold weather foot warming feature.

 

[demolition_x]

i made a notch in the front of the hold so it would sit right.

then i put some blue tape on the tube and installed the holds and glassed right over the tube

 

[Freestylin-FX1]

I pulled the exhaust tube out and "Dented" it to make it work. So far so good!

 

[chad]

I notched the front of the hold to make the pipe fit into the front of the hold.
Then glass over the hole.

just like Matt said ....... unless you have size 13+ clown feet your foot never goes up that far to worry about the hump you will end up with.
nothing in the freestyle world ever fits with out a little modification!

 

[oxnard111]

just like Matt said ....... unless you have size 13+ clown feet your foot never goes up that far to worry about the hump you will end up with.
nothing in the freestyle world ever fits with out a little modification!

surprisingly in my opinion, even though the REV look huge, when you get your feet in them, they don't feel huge.

 

[StandupWI]

I have some pictures of when I notched out the front I will get them up here in the next few days as soon as I find them. Really not to difficult and never gets in the way.

 

[WaterX117]

I lowered my exhaust tube about 2 inches and it was good to go. Easy to do.