Freestyle Bog when turn carb side

[Lil Dick]

I have a 701 61x motor with ada head an b pipe in my fs2 it runs strong but sometimes when the ski rolls to the carb side or I land wrong carb side also it gets a bog anyone know why it does this only on the intake side

 

[Joker]

Water in the bay splashing up into the carb?

 

[Matt_E]

Your rubber exhaust hose (or anything you have haphazardly zip-tied to it) contacts the diaphragm cover of the carburetor and blocks the pressure reference hole. Either make sure the rubber hose (or anything else in the vicinity) does not move, or better yet: take the diaphragm cover off and drill another hole in a different location.

 

[Lil Dick]

What you mean the diaphragm cover /where should I drill a hole an

 

[Matt_E]

That plate.

See the hole? Drill another in a different spot.

 

[Lil Dick]

Ok I got u now ill give that a world hopefully it does the trick

 

[Lil Dick]

Does it matter where on that plate I should do it or should I put it at the top in line with the other hole

 

[Matt_E]

Top, in line.

 

[Lil Dick]

Ok thanks

 

[kevbo]

I have a 701 61x motor with ada head an b pipe in my fs2 it runs strong but sometimes when the ski rolls to the carb side or I land wrong carb side also it gets a bog anyone know why it does this only on the intake side

One of our local riders battled this condition recently. He found the stock flame arrestors were a bit restrictive acting like a choke. Switching to open F/As and retuning ultimately cured the problem. Without making two changes at once, try closing the top screws until the right side bog disappears. Increase the pilot if response suffers when riding normally.