Super Jet ATP EPIC installation on a 61x/61x. Can I use the 62t stator and call it a day?

[1579]

As the title says. I have a nice clean 61x 701 I've been running in my square. I also have a complete 62t and a complete 64x, as well as some various parts (including a 62t stator). I am trying to decide what combination to run.

Right now I am thinking of running the epic on the 61x motor using the 62t stator. Will this (give me the same static timing) as it does on the 62t? I know the cases are different. I want to move to the 62t/61x eventually but the 61x is already in my ski and has run awsome. I'd like to see how much power I can make with it.

So again just to clarify, 61x motor using 62t stator and flywheel will work ok with the epic?

Thanks
Brandon

EDIT - Also, does anyone know the figures for the stock curve? I bought the epic second hand and don't really feel like trusting the curve without seeing the stock one first. Thanks

 

[ntrsspray]

You need a 62t stator and flywheel but yes they work fine

I have run it


Sent from my iPhone using Tapatalk

 

[DangerBoy]

62t flywheel and stator you will be fine, make sure its been updated to the v11 flash or higher
run fine on 61x steups also but you have to chech the static timing
Here is stoch and enhancer curves
http://www.x-h2o.com/attachment.php?attachmentid=1529&d=1139881251

 

[Nuklear6]

I thought there was a thread around somewhere that came to the conclusion epic on a 61x stator and flywheel had to have the curve offset 3.5 degrees. Just forget if it was + or - 3.5 degrees

 

[1579]

62t flywheel and stator you will be fine, make sure its been updated to the v11 flash or higher
run fine on 61x steups also but you have to chech the static timing
Here is stoch and enhancer curves
http://www.x-h2o.com/attachment.php?attachmentid=1529&d=1139881251

I can't seem to get the link to work... and I really want to!!!

Thanks for the responses everyone. I am going to definitely swap stators and see how it goes.

 

[1579]

When I swap in the 62t stator do i just align the mark on the stator with the arrow on the lower half of the cases? I cant seem to find a link to check or set the static timing.

Thanks
brandon