SUPERFREAK talk

[Kohldanielzimmer]

Really nice ski nice job

[sportfish258]

im in the middle of my new freak build and fig id share the pole spring setup i made,im using a xmetal pole and pinch bolts. uses a slightly modded sj spring. Attachment 194531Attachment 194532

That is a very creative solution thanks for posting.

[crab]

Just to add, I love mine also, pain to build but damn fun to ride...

I would also buy the spring setup, wonder if it could be offset some to ease pressure on the tubes? The bolts could also have indexing pins if needed.

[pabloescobar]

thanks, spring works great, i just finished and rode the new ski yesterday. im in love all over again, thanks again tem. Attachment 195595Attachment 195596Attachment 195597

Bump for a Ultra pimp/sano/sweet azz build. Strong work.

[Penken]

Attachment 195597

is that alu piece on the exhaust tube something new on the freaks. or is it something you built yourself

[madness maker]

Its a anodized aluminum gauge bezel used on boats, i used one around my versiplug as well.

thanks

[crab]

Hey another option might be this mounted directly under the pole, cylinder pivot just behind the breather holes and a ball mount up the underside of the pole so everything clears the hood. I took some rough measurments and it looks doable, just need to calculate the lift force needed to balance the pole out. http://www.mcmaster.com/#gas-springs/=jah53i I was looking at 4175T4 stainless

[KTM434]

Thanks for the Tubbie input, I never even thought about tubbies on one of these hulls..

I've thought about this a LOT and am hoping to find someone who has tried it on a Freak and can give some feedback.

[crab]

I don't want extra weight...

[JetManiac]

thanks, spring works great, i just finished and rode the new ski yesterday. im in love all over again, thanks again tem. Attachment 195595Attachment 195596Attachment 195597

John, I am digging the white/grey. Clean.