Freshly built Big Bore Stock Stroke 850cc, 2 available ready to ship 3200$

[raytherace]

We have built the first motor like that last winter with great result all over the summer 2012. It's a Bigbore stock stoke with 62T cylinder and 62T case. Case and cylinder are fully ported for freestyle and low-end in mind.

Here the setup offer for those 2 engine:

ADA Superbore girdled head(silver or blue) with dome for 180psi
Used 62T cylinder machined to receive new BB sleeve and ported by 911 Racing engine here in Quebec.
NEW Wiseco piston at 89mm(846cc). Last bore is 91mm (885cc)
Used 62T case machined to receive BB sleeve, full epoxy job, ported as well and dual pulse fitting intalled
NEW SBT crankshaft trued and welded

We had great result with big carbs and total loss, but was very impressive with an enhancer, stock flywheel and dual OEM 44's.

Video of me(pure rookie lol) riding it at CWA in Belle River, ON with BJ46, Vfroce3, Enhancer, Bpipe, Solas mag and stock flywheel. : https://www.youtube.com/watch?v=Pz8E...s&feature=plcp

Some people on here had test it and gave me really positive feed back. This setup is flipable by a rookie on a purpose hull.

3200$CAN + shipping



Sorry for my frenchglish. If something is not clear you can pm me, text or call. 1-418-265-3571

[raytherace]

top

[burton148]

Can you big bore 64X cylinders? i have a 62T/64X if you take cores? or how much to big bore this setup.

[raytherace]

Can you big bore 64X cylinders? i have a 62T/64X if you take cores? or how much to big bore this setup.

I can credit 250$ for the case and 100$ for cylinder and you have to ship me back you stuff.

[Marcgraham27]

I have tried 2 of these engines.. Both setups ripped hard, This will be my enigne of choice when the time comes