FX-1 Tom21 tubbie install. Help on placement

Location
Edmond ok
Got a set of tom21 bolt on tubbies for the fx1. I’ve put on a bunch of Superjet destroyers and they fit great.
I’ve having issues on where to place the Tom21 sponsons. If I run them like destroyers (all the way forward and down to the bottom) they don’t fit the curve at all. The only place I can get them to set somewhat flat is pretty far back.

Can you guys post pictures of where yours are mounted.
 

Attachments

  • 42BD3342-8593-4C68-9547-4075467396F5.jpeg
    42BD3342-8593-4C68-9547-4075467396F5.jpeg
    108.7 KB · Views: 83
  • 2C892C0B-4869-4934-A049-1818E809B21C.jpeg
    2C892C0B-4869-4934-A049-1818E809B21C.jpeg
    99.4 KB · Views: 82
  • 7AFB1190-FC9B-4E7A-96E1-5F490E4B6B60.jpeg
    7AFB1190-FC9B-4E7A-96E1-5F490E4B6B60.jpeg
    100.4 KB · Views: 101

hornedogg79

dodgin' bass boats
As far forward and low as you can get them. I remember my t21s not matching up perfectly. Think I sanded on those front corners a little to get them more forward. Look at frankyfx at Daytona and see how wide and forward his are.

Sent from my SM-G930V using Tapatalk
 

VXSXH20

Sionis Industries
Location
Mid-Atlantic
I had to sand my Toms as well, mine we’re screwed and back buttered epoxied to the hull
Like Horne said. Low and forward

f8fcbda1c246cfa9537d0249a6e24b2f.file
 
Location
Edmond ok
Had to do some sanding and prying, but they are on. Not my favorite, trying to make sure they are sealed 100% is hard. I can’t see the top or get a finger in there.
 

Attachments

  • E0AA42C5-8F9E-4F87-8288-002D5A115A7A.jpeg
    E0AA42C5-8F9E-4F87-8288-002D5A115A7A.jpeg
    104.8 KB · Views: 73
  • CCFF4519-FF41-4146-9C2D-906165429B3E.jpeg
    CCFF4519-FF41-4146-9C2D-906165429B3E.jpeg
    94.4 KB · Views: 74
  • B18A5132-EC9C-43BF-9BAF-9236F13AA2D2.jpeg
    B18A5132-EC9C-43BF-9BAF-9236F13AA2D2.jpeg
    94.8 KB · Views: 64
Top Bottom