Custom/Hybrid QSM Vengance Hull

Discussion in 'New Product Releases' started by Goingbigger, Mar 6, 2012.

  1. Goingbigger

    Goingbigger X

    Joined:
    Jul 21, 2006
    Messages:
    97
    Likes Received:
    0
    Location:
    So Cal
    Hey everyone I would like to officially announce the release of Quickstyle Motorsports new freestyle Hull called the Vengance. To give you guys a little back ground on QSMl we have been going against the grain building kawi based freestyle hulls for years. We have built just about every combination of stock, short, and lightweight decks for the 800sxr you can think of. Over the years we have tested just about every option to make the 800sxr a good freestyle ski. What we ended up with was a 800sxr hull so chopped up and modified it was clear that design was no longer sufficient. So we made our own. We didnt just take a bunch of ideas that could work and hope they do. This ski has had the sh#t tested out of it and it works. It works with a stock Kawi engine and it works with what ever biilet Yamaha beast engine you put in it. We will be posting technical info and video soon. Here are a few pics so far.

    Attached Files:

  2. Tmart

    Tmart formerly superjet444

    Joined:
    Jul 18, 2011
    Messages:
    631
    Likes Received:
    38
    Location:
    Middle Georgia
    Good looking ski. Looks kinda like the shape of a stunt with a superfreak nose.
  3. ph1lthy11y

    ph1lthy11y

    Joined:
    Nov 30, 2011
    Messages:
    169
    Likes Received:
    9
    Location:
    california
    you guys are right down the street from me can i check it out ?
  4. DAG

    DAG PIN IT TO WIN IT

    Joined:
    Apr 19, 2006
    Messages:
    4,819
    Likes Received:
    197
    Location:
    Lake Norman, NC
    price? weight? video?
  5. Twinturbostang

    Twinturbostang

    Joined:
    Sep 3, 2008
    Messages:
    3,348
    Likes Received:
    415
    Location:
    CT
    Is it kawi pump based?
    Kawi motor all the way! Stock kawi is a 6mil stroker yami! You can't beat a ported 800 for power.
  6. Big Kahuna

    Big Kahuna Happy Dose

    Joined:
    Jan 14, 2006
    Messages:
    19,692
    Likes Received:
    955
    Location:
    Tuscaloosa, AL
    Stock Kawi is not a 6mil Stroker Yamaha. It is a stock Kawi motor......
  7. Twinturbostang

    Twinturbostang

    Joined:
    Sep 3, 2008
    Messages:
    3,348
    Likes Received:
    415
    Location:
    CT
    Oh ya?
    Whats the stroke on a Yami again? And stock stroke on a Kawi?

    And Yami cases are junk thin.

    Take a ride on a ported Kawi with a good pump in a light hull. Change your mind real fast.
  8. Big Kahuna

    Big Kahuna Happy Dose

    Joined:
    Jan 14, 2006
    Messages:
    19,692
    Likes Received:
    955
    Location:
    Tuscaloosa, AL
    Stroke has nothing to do with it. Your not compairing apples to apples. When you can figure out how to bolt on a Yamaha Cylinder to a Kawi Case then your running a stroker motor. Otherwise you are running a stock Kawasaki power plant. You can order stroker cranks for Kawi Motors. Guess what, when you do this, you are running a stroked Kawi motor.

    I have raced for many years and ridden plenty of built Kawi motors that would make many of the built superjet motors wimper. Yeah, Yamaha Cases are thin, but Kawi has weak cylinders. Seen pleanty of them break as well. Both have strengths and weaknesses. Port Timing on the Kawi is not as good as the Yamaha. It takes much less to get a Yamaha motor to show significant gains.
  9. Big Kahuna

    Big Kahuna Happy Dose

    Joined:
    Jan 14, 2006
    Messages:
    19,692
    Likes Received:
    955
    Location:
    Tuscaloosa, AL
    Great Looking Hull.
  10. SXIPro

    SXIPro 736 Baby Big Bore

    Joined:
    Mar 17, 2006
    Messages:
    2,759
    Likes Received:
    138
    Location:
    Here on the 'X' mostly
    Wondering why Vengance and not Vengeance ?

    Also, mods: We need a stickied thread that has all the A/M hulls out there. Possible?
  11. JetManiac

    JetManiac Ready for Spring! Site Supporter

    Joined:
    Jun 8, 2008
    Messages:
    6,976
    Likes Received:
    683
    Location:
    orlando
    X2

    How long is it?
  12. WILKEY

    WILKEY SO FAR CHANGE SUCKS!!!!!! Site Supporter

    Joined:
    Oct 25, 2007
    Messages:
    3,083
    Likes Received:
    327
    Location:
    Va Beach."from the WOODZ not the damn hoodZ"
    Damn I like!!!!
  13. crazy4sand

    crazy4sand

    Joined:
    Aug 8, 2008
    Messages:
    1,659
    Likes Received:
    44
    Location:
    Vegas
    Not the place for a kawi vs Yamaha argument

    Nice lookin hull!
  14. Big Kahuna

    Big Kahuna Happy Dose

    Joined:
    Jan 14, 2006
    Messages:
    19,692
    Likes Received:
    955
    Location:
    Tuscaloosa, AL
    agreed.
  15. Twinturbostang

    Twinturbostang

    Joined:
    Sep 3, 2008
    Messages:
    3,348
    Likes Received:
    415
    Location:
    CT
    It was just because it was a kawi based ski and he said they were going against the grain.

    I would like to know the specs on this thing.
    lbs?
    lenght?
    cost?
  16. raytherace

    raytherace Canadian Brapp Dealer Site Supporter

    Joined:
    Sep 6, 2010
    Messages:
    1,971
    Likes Received:
    141
    Location:
    St-Ray Beach, QC
  17. Ejake

    Ejake straight cash homie

    Joined:
    Jan 9, 2008
    Messages:
    874
    Likes Received:
    11
    Location:
    Nixa, Mo & LOTO 43mm
    Very nice. Glad to see more options for us kawi guys.
  18. Goingbigger

    Goingbigger X

    Joined:
    Jul 21, 2006
    Messages:
    97
    Likes Received:
    0
    Location:
    So Cal
    The overall length is 78.5 inch. Max width is 29.5 inch. Weight for this ski is 75 lbs for a wet layup non carbon hull. The tray is 32 inches long and has a built in front foot hold. This hull will accept any power plant but does require a kawasaki drive line. here are a few more pics.

    Attached Files:

  19. 97superjet

    97superjet

    Joined:
    Apr 4, 2011
    Messages:
    461
    Likes Received:
    7
    Location:
    Minnesota
    Very nice hull guys, looks like a mini SXR! Any chance of having a side by side with an sxr to get an idea of changes from a stock hull?
  20. tensecrnr

    tensecrnr boost everything

    Joined:
    Oct 28, 2006
    Messages:
    381
    Likes Received:
    23
    Location:
    LA$ VEGA$
    Awesome hull...seen it plenty...and will be riding one soon... ;-)

Share This Page