Overall OVP steering system by OV products

Joined
May 9, 2013
Likes
68
Location
Green Cove Springs FL
#21
Will this interfere with mounting stock chinpad?
Will I have to raise pad to not hit steering?
Mine measures at 2.5 inches from the tongue of the pole to the top of bar clamp bolts. Risers bars complicate it a bit, depends on how steep you have your steering adjusted. If you have riser bars and original/stock steering settings, the risers might hit the chin pad at full throw. But I would recommend adjusting the steering quicker than that anyway.

I don't think you will have any clearance issues and if you do, you can trim the chin pad a bit to clear. Or maybe just put a couple washers under it to lift it up a bit. Sorry, not terribly familiar with chin pad on a RN.
 

RivMan

doing something stupid...
Site Supporter
Joined
May 6, 2011
Likes
131
Location
Pinckney, MI
#23
Is there an updated review of this system? How are they holding up? I need a new steering system, and this one is on the list.

Thanks
-Rob
 
Joined
May 6, 2014
Likes
27
Location
canada
#31
Wish i could put this one on my blowsion pole . Have to retighten my blowsion ovp every few rides . Have this settup on an rrp pole and have not retightend it ever.
 
Top Bottom