Custom pole bushings

Mike W

Infidel
Site Supporter
Joined
Jan 16, 2006
Likes
2,035
Location
North Florida
#9
I guess I should of mentioned I need a set made for a 440/550. Slightly thicker than stock to take some slight side to side play out of the pole.
 
Joined
Sep 14, 2013
Likes
1,098
Location
Houston, TX
#10
If you have a STP or autocad file, I can put you in touch with a machinist who has done work for me in the past, but it will be a little on the pricey side. Another option to look into is round machine shims on McMaster. You can get them in several sizes and thicknesses.


Sent from my iPhone using Tapatalk
 

Mike W

Infidel
Site Supporter
Joined
Jan 16, 2006
Likes
2,035
Location
North Florida
#11
If you have a STP or autocad file, I can put you in touch with a machinist who has done work for me in the past, but it will be a little on the pricey side. Another option to look into is round machine shims on McMaster. You can get them in several sizes and thicknesses.


Sent from my iPhone using Tapatalk
I think I’m going to look into just shimming it. That will probably work out better. Thanks for the McMaster lead.
 
Top Bottom