Search results

Posting this for a friend that is getting out of the sport: Up for sale a 2013 SJ with the following mods: Factory B pipe Am Head Impeller RRP Steering Bilge Pump Am intake grate Very nice condition condition; hood was peeling off so it was painted in the proper way by a pro. (Sanded, Primer...

Does anybody know what brand piston this one might be? It says “made in japan” and “YMG46” so i guess is a Pro x? I doubt its an OEM...is a 84 mm but im unsure about the brand. Thanks! Sent from my iPhone using Tapatalk

Hi, im going to Daytona today to spend the long WE. Does anybody know where is the zone these days? Thanks! Sent from my iPhone using Tapatalk

Is it enough to remove the chamber or the head pipe needs to be taken put as well? (Trying to figure out if i need to get the gasket before tackling the job). I assume the manifold can be left (i hate to deal with those 8 screws....) Thanks! Sent from my iPhone using Tapatalk

Hi , Im doing some maintenance to my starter that was slower than usual and i would like to replace the two big o rings Pn 35C-81844-00-00 But Yamaha sells them for around 30 bucks each ! Has anybody managed to get similar o-rings for less? ( they dont look special to be so expensive...)...

Hi, While trying to adjust my RRP pole to be stiffer i broke the nut.(its a black nut). I ve seen that the bolt and nut is sold by RRP dealers so i wonder if anybody know the its size (i guess its imperial size?) Thanks in advance! Sent from my iPhone using Tapatalk

Hi , After rebuilding the carbs, adding a limited B pipe and AM FA, the ski started bogging down when it is tilted to its left side. As soon it is vertical again it clears up and runs like a champ. No low speed hesitation or bogging due to be too rich. Any ideas?? Thanks!!

Does anybody know where I could get these bolts? I over tightened a couple and I damaged the heads.... Thanks!!

Hi Everybody, I know almost everybody don't use the oil injection but I still run it in my 96 Blaster. Since the tank is leaking Ive managed to find a nice looking tank (it still looks white!) in Ebay out from a 94 but PN are different , GR7-6775B-00-00 (1996) vs GA7-6775B-00-00 (1994) . Does...

Hi , I'm using a 96 Blaster as a donor for a New build and i have laying around my 2010 SJ CDI (i put an Enhancer in the SJ) so i was thinking in using the newer CdI but I'm unsure if the stator of the old 62T is the same than in newer models. The blaster uses different spark plugs (BR8HS vs...

Hi, I picked a WB1 96 in pristine condition last week. I drove all the way up from Miami to NC to get it (1600 miles roundtrip) and it was well worth it. Sky was used just a few times (one owner) in fresh water and it is totally stock. I'm wondering if there is some kind of side rail kit in...