my winter overhaul

[sprocketq]

Hi guys have posted sum pics of my build on pwc today but thought i'd bore you guys now:biggrin: Started this a couple of months ago with the intention of a quick spray job and needless to say it got a bit out of hand lol I stripped the origional paint and flush filled the gas cap , reworked the footholds, and fitted an atp scupper valve.

[sprocketq]

didnt have to do 2 much on the motor as had ripped it apart 6 months previous so just changed the o rings and checked the bores, fitted a new pump ring as the old one was cracked .

[ketsair]

that's pretty sweet!! i like those holds, what exactly did you do to them??

[sprocketq]

ok ski back from the painters so time to start the reasembly and the matts couldnt use a freestyle kit as the footholds had been alterd ,

[sprocketq]

next the engine bay install the motor , jetenetics total loss and exhaust.

[sprocketq]

next install the pump and get the trim working which is a variation on the cats system, and fit the side rail turf again this was made off the roll

[sprocketq]

the footholds are atp ones with a peice of glass i made from a templte to follow the contour of the bit that sits over the top of your foot

[ketsair]

you don't have any b4 pics of it do ya??...the holds?

[sprocketq]

and this is a few pics all finished with the graphics on now just waiting for a break in the weather so i can go watertest it:Banane01:

[sprocketq]

ketsair you have mail

[ketsair]

ketsair you have mail
i feel so special:biggrin:

[sprocketq]

lol well thats about it hopefully going to get it on the water sunday to check ive rememberd to do all the bolts up. will try and get a mate to get some pics of her in action at some point.
regards sprocket

[onesojourner]

your ski looks great. I really like the turf job.

[IceRocket1286]

looks great! love the foothold modification

[YAMA CAT]

Looks awsome! You do fine work :You_Rock_Emoticon:

[sprocketq]

Cheers guys well aprecaiated the nice comments. the storry behind the ski is i bought it about 4 years ago after i ripped the nose off my square, I was compeating in the jsra (british freestyle) championships so needed a new boat for that it started as a 96 which had been subed into a breakwater and all the frount was trashed so i repaired and swapped most of the stuff from the square and had it sprayed gold as you can see in the avatar, well retired now so the ski needed a well deserved make over and a lot of long needed repairs and this was the finifshed article which im well happy with. ill try and get some more pics of the engine bay as theres a few trick bits in there as well.

just a couple of thanks for the help chris giles at ATP for building the one off hood hes been very suportive for me and a lot of other guys in the sport and my mate Matt hards whos just started a graphix bussynes Kalido desighn who did the stickers sweet job mate

[madoyster]

Good work Fellow Brit:woot: