Waste Land
08-28-2006, 03:33 PM
Here is your basic Mikuni Carb.
http://img472.imageshack.us/img472/7485/carb4ry1.jpg
Find the rear of the carb marked with a R. Remove the 4 Phillip/Flat Head Screws
http://img174.imageshack.us/img174/3483/carb1fe0.jpg
Remove the two phillips head screws holding in the jet cover. Be carefull, these are very soft metal and will strip EASY.
http://img103.imageshack.us/img103/6726/carb2kk4.jpg
Using a flat head screw driver remove the jets from the carb.
http://img103.imageshack.us/img103/2349/carb3rs8.jpg
Screw new jets in snug not tightened a lot and proceed to put the carb back together.
http://img472.imageshack.us/img472/7485/carb4ry1.jpg
Find the rear of the carb marked with a R. Remove the 4 Phillip/Flat Head Screws
http://img174.imageshack.us/img174/3483/carb1fe0.jpg
Remove the two phillips head screws holding in the jet cover. Be carefull, these are very soft metal and will strip EASY.
http://img103.imageshack.us/img103/6726/carb2kk4.jpg
Using a flat head screw driver remove the jets from the carb.
http://img103.imageshack.us/img103/2349/carb3rs8.jpg
Screw new jets in snug not tightened a lot and proceed to put the carb back together.