750 x2 Q and A

[agua]

When i put my 750 into my x2 will i be able to use my 650 westcoast pipe and mariner water box in it if i use the 650 exaust mani on the 750?

[u887266]

yes you will. I am running a 650 westcoast pipe and main on my 750X2. You shouldnt have any problems with that set-up.

[tom21]

other than the lack of power. I need to fix one seal on my x2 and we will see how it rips with the factory pipe in it. still need a better prop but it should be rideable.

[Motorheads5]

It will be fine, Yes a factory pipe would be better but you are gaining plenty just going with the 750

[Jayski]

Is it a SX/SXI motor?, might need to change the standard exhaust manifold if its not.. Dont use your 650 manifold, get a westie or a 750sxi one they are opened up a bit more.

you have the 750 electrics or are you running 650?

[agua]

gonna be running 750 engine, 650 wc pipe, 650 marriner water box, 750 electics with

[shawn_NJ]

Is it a SX/SXI motor?, might need to change the standard exhaust manifold if its not.. Dont use your 650 manifold, get a westie or a 750sxi one they are opened up a bit more.

you have the 750 electrics or are you running 650?

750sxi manifolds have the 3bolt 650 pattern?

[agua]

im not sure but ill be happy to check when i get my donor ski

[Jayski]

750sxi manifolds have the 3bolt 650 pattern?

yep it does..

[Cannibal]

You sure about that? Every one I've seen pictures of has a 4 bolt pattern. I don't have one in my possession to verify though


Here's one on ebay though:

Click me (http://cgi.ebay.com/ebaymotors/Kawasaki-750-Engine-ZXI-STS-SXI-SX-XI-SS-Motor-Jet-Ski_W0QQitemZ180411721088QQcmdZViewItemQQptZPerson al_Watercraft_Parts?hash=item2a01606580&_trksid=p4506.c0.m245#ht_500wt_975)

[shawn_NJ]

yep it does..

Sure about that?

http://www.surf-mb.com/images/sxi.JPG

sxi gasket set.
http://www.surf-mb.com/images/sxi2.JPG

[Cannibal]

I think maybe he was talking about the manifold to cylinder.

[Jayski]

You sure about that? Every one I've seen pictures of has a 4 bolt pattern. I don't have one in my possession to verify though


Here's one on ebay though:

Click me (http://cgi.ebay.com/ebaymotors/Kawasaki-750-Engine-ZXI-STS-SXI-SX-XI-SS-Motor-Jet-Ski_W0QQitemZ180411721088QQcmdZViewItemQQptZPerson al_Watercraft_Parts?hash=item2a01606580&_trksid=p4506.c0.m245#ht_500wt_975)

I know the 750ss & the xl & the TS and SS im pritty sure manifold was 4 bolt pattern as is the coffmans manifold but i was 95%sure the 750sx & sxi was 3.. Ok excuse me if im wrong, I hate when people give advice when they dont know what they are talking about...

well get a PJS, jetport or westcoast manifold they are 3 bolt.. the westie one is a little more ported i believe.

[w-nut]

the sx and sxi standard manafold,s are a 4 bolt . the factory pipe one for them is a 3 bolt , perhaps that is what you were thinking off

[Jayski]

the sx and sxi standard manafold,s are a 4 bolt . the factory pipe one for them is a 3 bolt , perhaps that is what you were thinking off

maybe I stand corrected sorry guys. thanks. I was aware the factory pipe is a 3bolt as my sxi has one.. Just thought standard man was also one.. ohwell

[agua]

so... would i be able to put my 650 engine to pipe mani on it?

[shawn_NJ]

so... would i be able to put my 650 engine to pipe mani on it?

650 West Coast solid top manifold is your best bet. Late model X2 stocker manifolds with diverter also work okay.