B1 Limited Chamber in 701 X2

[x2skier]

True Frankenstein title there^^^^^^

Anyway, has anybody tried fitting the B1 Limited chamber with the 701 in the X2? I'm wondering if its going to be too long to mate up with the X2 waterbox considering the 701 sits further to the front in the X2 hull.

I know the Kawasaki 750, the end of the chamber is right at the waterbox inlet with very little room to spare.

[dbrutherford]

Yeah i think Shawn or X2 rags couldn't do it on their conversions. I have never doen a conversion or mocked up a B1 limited chamber so I have no input here. Why not use a B1 mod like you were already doing?

[Winter X2]

True Frankenstein title there^^^^^^

Anyway, has anybody tried fitting the B1 Limited chamber with the 701 in the X2? I'm wondering if its going to be too long to mate up with the X2 waterbox considering the 701 sits further to the front in the X2 hull.

I know the Kawasaki 750, the end of the chamber is right at the waterbox inlet with very little room to spare.


Get some high temp flex tube and make it work... If it leaks... use duct tape!!!:booty:

[x2skier]

Yeah i think Shawn or X2 rags couldn't do it on their conversions. I have never doen a conversion or mocked up a B1 limited chamber so I have no input here. Why not use a B1 mod like you were already doing?


I am still using the Mod but I'm building another with a Group K 845 and B1 Limited chamber.

[crab]

Hts the hull.

[x2skier]

Hts the hull.

Care to expand on that a wee bit further?

[ADDict]

Yeah I can. The 701 is wider. The chamber will not clear the side of the hull and the manifold to get close enough back to the head pipe. You would either have to bash the chamber in, or use a 4 inch long coupler, haha.
Just not going to fit. I'm sure SOMEONE might make it work with mods, but why waste the time when the SJ mod fits ever so nicely..
I fought the blaster limited for many hours, eventually I gave it up. Works great with a 750.

[x2skier]

Thanks. That's the info I needed. SJ Mod chamber it is.

[Vumad]

I dont know how much difference there is as i have never held a blaster pipe in my hands... but i put a factory pipe 750 limited in my X2. It fits using a westcoast 650 manifold bored out with a larger coupler to connect the chamber to the headpipe. There is a link to my build in my sig.

The current exhaust routing sucks so we're talking about how to improve the routing after the pipe. Low piority as I need some pistons.

[x2skier]

I dont know how much difference there is as i have never held a blaster pipe in my hands... but i put a factory pipe 750 limited in my X2. It fits using a westcoast 650 manifold bored out with a larger coupler to connect the chamber to the headpipe. There is a link to my build in my sig.

The current exhaust routing sucks so we're talking about how to improve the routing after the pipe. Low piority as I need some pistons.


That's a B1 Mod chamber and it fits (no cleranacing required) and performs awesome with the Kawasaki 750 and SJ tank. This is what I was running all last year. The other ski I'm working on already has a B1 Limited chamber and was hoping to use that.

http://i182.photobucket.com/albums/x188/x2skier/1987X2047.jpg[/

[ADDict]

Yeah I was able to fit the blaster mod, and a TNT no problem, no go on the blaster limited. The SJ mod just fits too good to fight anything else.