View Full Version : New x2 trim assembly
01-27-2009, 02:33 PM
HERE IT IS GUYS. INSTALLED AND WORKING GOOD. IT PULLS EASILY TO ABOUT 1/2 THROTTLE AND COULD USE TO BE BLED A LITTLE MORE. :arms:
LOOKING FOR INTEREST AND ORDERS TO START PRODUCTION.
they will run around $350-400 for the lever, line, actuator and cnc machined trim assembly. mounting is a simple 2 bolt through the tower as well as removing and cutting the treads down on the stock trim shaft.
01-27-2009, 04:28 PM
looks good man! I would be interested in one in about 2-3 weeks
01-28-2009, 12:04 AM
So if you come off the gas pull it, then nail the gas will it bend the rod?
01-28-2009, 01:35 AM
the rod has been shortened in it's weakest spot during installation at the joint, i have pulled it at 1/2 throttle w/ no problem yet. it also has sealed bearings at the pivot point for that butter like feel
i will keep everyone updated as needed.
i have over thought this piece and will warranty it fully.
01-28-2009, 10:52 AM
Looks like a great part
01-28-2009, 11:12 AM
thanks it will also be universal for all skis soon w/ an adaptor plate
01-28-2009, 11:15 AM
i was eyeballing it in daytona. definitely a nice piece of work!
01-28-2009, 11:25 AM
The banana king has spoken !!!!!!!!!!!!!!!
The banana king has spoken !!!!!!!!!!!!!!!I thought the banana king was the speedo/mullet guy?:cheer2:
01-28-2009, 11:38 AM
I thought the banana king was the speedo/mullet guy?:cheer2:
No thats the banana hammock,totally different guy!:eek2:
01-28-2009, 11:58 AM
01-28-2009, 12:19 PM
it's still loose in the pics. i will take some new ones today. thats why it looks cock eyed
01-28-2009, 12:20 PM
Lol ,he said cock eyed!
01-28-2009, 01:27 PM
new pics and throw pic :scratchchin:
01-28-2009, 02:23 PM
01-28-2009, 02:40 PM
you saw it in daytona. looking forward to having this be the premier piece for multiple skis
01-28-2009, 04:01 PM
ive seen this bad boy in person fellas and its pretty schweet, when i get my tax check, i will b in for one
01-28-2009, 06:28 PM
^^^^^same here, I'm in for one!!!
01-28-2009, 10:48 PM
how long you looking until you got them ready. after some tough calculations I am ready to go...
steak= no trim
mac&cheese and ramen noodle= TRIM!!!
01-28-2009, 10:50 PM
^^^^ total opposite of a normal date!!!
01-29-2009, 11:30 AM
i am working out production now and will be taking deposits soon and balance will be due at or before ship date.
thanks for your support
01-29-2009, 06:27 PM
Justin, I am in for one. Hope to go ride sometime down your way sometime.
02-03-2009, 12:12 PM
I would be interested in one too.
LMK when you get your first set of them ready.
02-03-2009, 12:13 PM
i am making a revision to the stops and going to visit a couple of machine shops this week to get the right price on production.
02-09-2009, 08:01 PM
any updates? are you looking to selll them with the same lever you have on your ski in the pic? I'm diggin the red lever!
02-09-2009, 08:04 PM
yes on the lever, haven't made it to the machine shops w/ cnc's yet to get the final pricing
02-10-2009, 12:33 PM
SWEET!! Keep us posted, I'm in for one for sure!
02-25-2009, 12:21 PM
patiently waiting.... :biggthumpup:
02-25-2009, 01:58 PM
i am having a problem right now on finding someone that i feel will treat my small production runs with respect and proffesionalism their larger jobs get.
it will happen soon
02-25-2009, 02:11 PM
Yeah i know what you mean.... I am in no hurry.. snows still falling here! When you do get it going i will be one of the first on that list!
02-25-2009, 02:14 PM
cool, thanks for staying on board
03-11-2009, 11:47 PM
Any new info ?
03-11-2009, 11:52 PM
they will be available very soon, made two small revisions.
03-12-2009, 01:04 AM
I CAN'T WAIT!!!!:cheer2::cheer2::cheer2:
03-26-2009, 09:43 PM
04-30-2009, 11:29 AM
Whats the deal its been a long time and still now word???
04-30-2009, 11:32 AM
the final proto type is in route to me and then it along w/ a contract will be sent out to the person that will be producing it. sorry to let you guys down on the speed of production but i have been a bit tied up, as well as my r&d guy with his actual job.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.