Single Intake Manifold SJ

[EXPERIMENTAL]

Hey guys i'm looking for a Single Intake manifold that will fit a 48mm carb. I have 61x cases if that helps at all.

Thanks ahead of time for any replies - Jake

[Matt_E]

Take the stock intake manifold and grind it out to 48mm. About a 10-15 minute job, it's free.

[Idok]

and its the ONLY option.....as far as I know, noone has ever made an a/m 61x single mani

[EXPERIMENTAL]

Sry guys the grind job is not an option. I baught the boat and as an ex-race ski it came with a dual 48mm riva pro series and a dual intake. I'm converting it over the the dark side (freestyle) and we've already swapped out the pipe from a type 4 to a B-pipe, now i want to go single carb becuase the duals are proving to be a ROYAL PAIN to try and dial in correctly. But thanks for the advice. I guess i was just wondering if anyone had a single intake laying around that would fit a 48mm for a quick swap. Otherwise i don't want to put my boat out of commision for a long time, especially during mid season

[Idok]

ok, what were saying is there is NO OPTION for a 48mm 61x intake manifold

the only aftermarket intake mani ever made for a 61x is/was a dual carb manifold

you MUST grind out a stocker.....it will literally take you 15 minutes if you have a 1/4 angle grinder and an air compressor...

it will take an hour if you use a dremel

[gorilla]

the 61x wetjet single carb intake manifold is the only other single carb intake manifold option.

they are the hardest to find at a reasonable price.
most of the people's that have one for sale, are like the people's selling the factory b pipe.
they all want gold for those parts.

good luck

gorilla

[Big Kahuna]

the 61x wetjet single carb intake manifold is the only other single carb intake manifold option.

they are the hardest to find at a reasonable price.
most of the people's that have one for sale, are like the people's selling the factory b pipe.
they all want gold for those parts.

good luck

gorilla

That is still a OEM Manifold.


Find you a stock manifold off of here or fleebay........then grind it out.

But honestly, a 44 or 46 carb will work just as good.

[chrisdoc0608]

ill check my parts tonight when im in the shop, i think i have one that ill give you for cost of shipping.

[grezzmky]

Jake i know this is an old thread but why would you boat have 61x cases...? and, what did you end up doing?
Jared

[showmepro1200]

Jake i know this is an old thread but why would you boat have 61x cases...? and, what did you end up doing?
Jared

Jared - I'll answer for Jake, since he doesn't seem to be getting on here much these days with school and all.

He was incorrect at the time - he has 62T cases. And he still is using the dual 48's.

You gonna make it to the freeride this year? I won't miss it for anything.

[grezzmky]

oh yea, ill be there again. Im trying to work out a motor deal with team scream right now.

[seatsR4toilets]

I have one.
$200
It's a wet jet west coast wwp.
Rare as can be.