speedwerx pipe on blaster

[cattledog]

can a speedwerx pipe for superjet fit on b1 blaster

[joesuperjet]

Yes - with a hammer

JAM

[joesuperjet]

These are Speedwerx SJ pipes that we used to run in our blasters. You really only need to dent the pipe on the side near the coupler to clear the hull. Good Luck

JAM

[cattledog]

thanks for the nice pics , you really helped me out

[Speedfreak]

No it won't fit... Ill give you $50 for it that should cover scrap aluminum prices...

[bad93blaster]

i have had 3 differnt speedwerx sj pipes in blasters

[Speedfreak]

i have had 3 differnt speedwerx sj pipes in blasters

Umm do you mean speedwerx in 3 different blasters? I thought they only made the freestyle and the race pipe

[cattledog]

These are Speedwerx SJ pipes that we used to run in our blasters. You really only need to dent the pipe on the side near the coupler to clear the hull. Good Luck

JAM the pipe looks like its going to rub on hull

[joesuperjet]

This pic was of my MOD Blaster hull. It fits better in the stock hull. Trust me it will fit just fine.

JAM

[cattledog]

where to get coupler for speedwerx pipe and what size it the outlet of pipe

[cattledog]

i have had 3 differnt speedwerx sj pipes in blastershey adam did you use stock waterbox and e box

[joesuperjet]

All of our set ups run GP760 waterboxes that are located in the rear of the craft.

JAM

[cattledog]

thanks for info i see you have total lost system the stock e box will be in way

[joesuperjet]

It will fit with the stock box

JAM

[waxhead]

whats the benefit of a 760 water box

[joesuperjet]

It's the s h i t wax... The GP760/raider waterbox just works the best in most mod engine setups. Hell, most of the Sea-doo xp 800 guys that we race with run them too.

JAM

[waxhead]

i was using a hx one on my ski with nothing inside it

worked really well
it had the outlet on the top and not in the end as per normal

[global warmer]

am also running gp760 waterbox with my gp800r setup,have a stock hull and had to flatten the inlet end to get it in the right position but it works great!

[bad93blaster]

hey adam did you use stock waterbox and e box

my mod ski has a stock ebox with a raider water like joe posted

im gonna have a limited boat next week that will have a riva blaster waterbox in it and a stock e box (im to lazy to cut the tray and running out of time)