Intalled R&D Time Advance kit, Now, no spark

[strictlystandups]

I have a 92 SX and I just recently put the timing advance kit on and followed directions to the tee and put everything back to gether one hundred percent proper and now I have no spark:censored:. I had hot spark before I did the job. I did all the checks in the manual however there were no specs for the voltage output of the pulser coil. All the correct resistances were there though. I bypassed my kill swith just in case and I obviously checked my fuse. Did I miss something? should I go by the generic specs of 3-5 VAC. In the dark with no spark, please advise

[vomitspot]

id say the pick up is on backwards
but kawie had stator problems in the early 750 days
i dont have any ohm # but thats where to start
or tear it back down and check your pick up

[strictlystandups]

id say the pick up is on backwards
but kawie had stator problems in the early 750 days
i dont have any ohm # but thats where to start
or tear it back down and check your pick up
thanks vomitspot your input is appreciated but I really dont any way how you can put you the pick up coil on backwards. it fits on there one way.

[Samba2]

posting pics may help diagnostics :Banane37: