X2 carb setting suggestions

[hydrostyler]

Alright, I am finally trying to get my x2 dialed in. It is an 88 with a stock bore 650. I am running a westcoast head(170psi), exhaust, and waterbox. I've upgraded to a 42mm CDK II w/stock f/a and am looking for advice as to what jets, n/s, and pop-off I should use to get me started. Anyone?...:cool2:

[groaty]

i have the same mods on my x2 but i have a 44mm carb my setup is a 120 low 150 main and a 2.3 n/s i know our carbs are different sizes but might point you in the right direction.

[hydrostyler]

Hey, groaty... thanks for the ideas, but if you're running a mikuni, I'm sure the settings will be entirely different. I'm getting ready to tear my Keihin apart to see what I'm even starting with.

[Legdragger]

152 high speed jet and an 82 low speed about 1 turn out on both should get you iin the ballpark.