Slutty - garage sale

[yamaslut]

used 0 degree UMI bars (SJ)
$20

new 4 degree extended UMI bars (sj)
$20

UMI turnplate (SJ)
$25

stock turnplate (sj)
$10

starter bendix
make offer

Ocean Pro super jet ride plate
decent condition

kawasaki side exhaust
$20

Squarenose hoods - 2 ea.
I have two squarenose hoods... one has the slutty hood mod already done to it, but there is a nice crack in the side... nothing that could not be fixed.... hell I would stip it fix it and paint it if someone wanted to pay extra... $100 as is or $200 fixed and sprayed white w/ BC/CC omni line

also... one totally stock hood

squarenose chinpad - 2 ea.
one black, one yellow and black
$20

Exit Nozzles - 1 ea.
buy the nozzle from me for $20 send it to Paul (www.jrmagoo.com (http://www.jrmagoo.com)) and for around $25 he will bore it out for you...

61-x cases - 1 ea.
perfect condition standard bore
$100

Steering Nozzle - 1 ea.
drilled for quick steering
$15

factory pipe waterbox - 1 ea.
it had a hole, but I had it welded... so it's perfect now
$60 SOLD

S.S. side exhaust
really nice flush fit, thru-hull fitting for side exhaust...
$15 SOLD

[3rid]

hi nick,

I'm interested in your 61-x top end.

Let me know roughly how much you want for it.

Thanks

[jetskier79]

Nick, what are you looking for for that b-pipe?

And for that D cut rideplate? How much did you use that thing? I've been thinking about trying it, but I'm too lazy.

[steve802cc]

Hmmm very interesting.
Pm'd you

[yamaslut]

make ofers on the top end... or someone tell me what that would be worth.. I have no clue

[yamaslut]

Nick, what are you looking for for that b-pipe?

And for that D cut rideplate? How much did you use that thing? I've been thinking about trying it, but I'm too lazy.

it's not a cut plate... it has a D indentation molded into the plate... I loved it on my B1... really carved soooo sweet..

35$ for the plate
the pipe well, i pmed you

[jetskier79]

meh, fck you and your "indentions" :Banane26: :wink:

I want to try out a d-cut plate.

[steve802cc]

yamaslut has exceeded their stored private messages quota and can not accept further messages until they clear some space.

Hey Nick,
Clean out your PM inbox I'm getting the above message when I try to PM you.
Steve

[keefer]

Nick I am interested in the -2 square handle pole. Send me a picture. Thanx

[yamaslut]

Werd... My Box Is Not Full Anymore... Sorry, I Get A **** Load Of Pms

[yamaslut]

meh, fck you and your "indentions" :Banane26: :wink:

I want to try out a d-cut plate.

I'll post a pic fool

[Mouthfulloflake]

yo dude...

pistons or no with that top end set up?

I could use that!

[yamaslut]

people are not grasping this for some reason....:aargh4: :aargh4: :aargh4: :aargh4:

61-x top end

included:
61-x cylinders - 1 ea.
OEM head never removed from cylinders - 1 ea.
OEM standard bore pistons - 2 ea.
OEM rings - still installed on pistons, never removed - 2 ea.
Wrist pins - 2 ea.
Wrist bearings - 2 ea.
"C" clips - 4 ea.

[waxhead]

i am also interested in the 61x top end

[WaveDemon]

Is that the same WB plate I was supposed to get from you in daytona?

[yamaslut]

Is that the same WB plate I was supposed to get from you in daytona?

yup... the one you were too cool for
:Banane01:

[Ross_C]

so does this top end come with bolts too? You know the ones that hold the head on real tight...how about a head gasket...is there one of those too? Are you going to include a valve job with it?

[Ross_C]

Mouth...that is not directed at you...just giving sir slutty a little crap

[yamaslut]

so does this top end come with bolts too? You know the ones that hold the head on real tight...how about a head gasket...is there one of those too? Are you going to include a valve job with it?

I'll give you a valve job sweetheart.......:headbang: :headbang: :headbang:

[WaveDemon]

yup... the one you were too cool for
:Banane01:put me in the back of the line for it I guess...

[guiness92]

id be interested in the pole too if keefer doesnt take it, pic and price on it would be cool too.

[jetskier79]

put me in the back of the line for it I guess...

I'm prooobably going to pass. I'm looking for loose and squirrly in a ride plate.

[WaveDemon]

I'm prooobably going to pass. I'm looking for loose and squirrly in a ride plate.
back to the front :Banane01: :Banane01: :Banane01:

How bout we make the transaction on daytona beach feb 11th? I can paypal if you want.

[Ross_C]

I'll give you a valve job sweetheart.......:headbang: :headbang: :headbang:


I said valve job not rim job...you sicko :Banane01:

[jetskier79]

I said valve job not rim job...you sicko :Banane01:

Ross will probably accept either.

:bad:

[Mouthfulloflake]

does it come with fuel too?

you didnt list pistons in your first post is why I was asking!

=================================================
61-x top end
pulled from my new motor in great shape. included: cylinder, wrist bearings, rings, wrist pins, head off 97 sj w/ very low hrs. inexpensive replacement for a blown top end...
=================================================

damn wankers!

Ill pm you and let you know how broke I am.

[hangtime]

I'd be interested in the stock roundnose pole :headbang:

[IceRocket1286]

You dont happen to have a start/stop switch with wires do you? I have 2. One is trashed and spliced and doesnt work right, the other is FUGLY all mangled.

[Robert]

Dammit Nick. Is that the Jet dynamics concave ride plate? Looks like I'm 2nd after Wave Demon as long as it is not tweaked like the superjet plate you let me borrow.

[michael950]

Interested in the SJ JD intake.

[yamaslut]

put me in the back of the line for it I guess...

werd up....
will post pic tomorrow... fed up the pics

[yamaslut]

I'm a ****ing stoner.... what do ya expect?????????
:27:

does it come with fuel too?

you didnt list pistons in your first post is why I was asking!

=================================================
61-x top end
pulled from my new motor in great shape. included: cylinder, wrist bearings, rings, wrist pins, head off 97 sj w/ very low hrs. inexpensive replacement for a blown top end...
=================================================

damn wankers!

Ill pm you and let you know how broke I am.

[yamaslut]

You dont happen to have a start/stop switch with wires do you? I have 2. One is trashed and spliced and doesnt work right, the other is FUGLY all mangled.

I think I do... let me check again... if I do, I will test it tonight and make sure it works...

[WaveDemon]

werd up....
will post pic tomorrow... fed up the pics
I'm getting the plate. let me know how you want to get paid.

[yamaslut]

I'm getting the plate. let me know how you want to get paid.

ok.... 40$

paypal: jetskiscorpion@netzero.com

[WaveDemon]

ok.... 40$



it's not a cut plate... it has a D indentation molded into the plate... I loved it on my B1... really carved soooo sweet..

35$ for the plate


slut, I hope the extra $5 was for shipping... I'll pick it up next weekend no shipping requiered.

[yamaslut]

slut, I hope the extra $5 was for shipping... I'll pick it up next weekend no shipping requiered.


lol... that will work... I forgot I posted that:Banane01:

[IceRocket1286]

I think I do... let me check again... if I do, I will test it tonight and make sure it works...


cool, thanks dude!

[yamaslut]

go to first post and check for new listings....
I just added a few things...

[Mouthfulloflake]

Hey!

westcoast head.

stock gasket or special one? ( or oring?)
what compression does it give?

let me know Ill paypal you right away

shipped to 72701

[Mark44]

PM sent on CDI. Payment sent

Mark44
The Almighty

[yamaslut]

got the pms....

[GDFL]

What material is on the chin pads? I may pick one up from you after I get down there if they're still around. moving in 12 days
Garrett

[yamaslut]

What material is on the chin pads? I may pick one up from you after I get down there if they're still around. moving in 12 days
Garrett

stock... i have extra material to recover too

[Idok]

you got any extra waterbox bearings? what about that PPG throttle inversion system?

[yamaslut]

you got any extra waterbox bearings? what about that PPG throttle inversion system?

I got a FP waterbox... holy ****... another thing I forgot to list...

I got a gift certificate for a free ass whoopin'.... I can hand deliver it to you.... no shipping

:nutkick:

[Idok]

ill take that box....ill pay ya next weekend when we come down....

[WaveDemon]

Is this garage sale to fund another slutty ski project???

[Idok]

i think its funding the LAST ski project ;)

[Matt_E]

What is this "funding" you speak of? :17: :Banane01:

[Glory_Freestyle]

YO Slutty, I'm interested in the Intermediate Housing Assembly. It is for older Squarenose's right?

[ski4]

and, if that shaft and intermediat e housing is for a round nose i am intrested

[yamaslut]

Is this garage sale to fund another slutty ski project???

Idok hit it on the head :bigeyes: :bigeyes:

[yamaslut]

YO Slutty, I'm interested in the Intermediate Housing Assembly. It is for older Squarenose's right?

yes it is.... :Banane01:

[Glory_Freestyle]

yes it is.... :Banane01:

Cool I'll take it. I'll send you the Paypal today.

Is it $125 total or $125 + Shipping???

[Idok]

YO Slutty, I'm interested in the Intermediate Housing Assembly. It is for older Squarenose's right?


actually NO, its for the NEWER model squarenose :dunce:














ducking and running :fing02:

[yamaslut]

Cool I'll take it. I'll send you the Paypal today.

Is it $125 total or $125 + Shipping???

for you 125+ shipping...
j/k it's all you
:Banane01:

[Glory_Freestyle]

actually NO, its for the NEWER model squarenose :dunce:


ducking and running :fing02:



Bite me. I wanted to make sure it wasn't the new style housing that has a different bolt pattern.

Ride more, talk smack less. :biggrin: Maybe then, you'll actually be able to jump higher than 2-3 inches.:firedevil:

[Glory_Freestyle]

for you 125+ shipping...
j/k it's all you
:Banane01:

Cool. I'll Paypal you right now.

[yamaslut]

Cool. I'll Paypal you right now.

werd up big dog

[Idok]

=Glory_Freestyle]Bite me. I wanted to make sure it wasn't the new style housing that has a different bolt pattern.

Ride more, talk smack less. :biggrin: Maybe then, you'll actually be able to jump higher than 2-3 inches.:firedevil:[/quote]



i KNOW that someone from colorado is not telling the FL boy to ride more :smileeek:



but as far as jumping, hey...im afraid of heights! :bananalama:

[Glory_Freestyle]

Bite me. I wanted to make sure it wasn't the new style housing that has a different bolt pattern.

Ride more, talk smack less. :biggrin: Maybe then, you'll actually be able to jump higher than 2-3 inches.:firedevil:



i KNOW that someone from colorado is not telling the FL boy to ride more :smileeek:



but as far as jumping, hey...im afraid of heights! :bananalama:

:biggrin: :biggrin: :biggrin:

[IceRocket1286]

slut, whats the word on a start/stop housing and wiring?

[yamaslut]

slut, whats the word on a start/stop housing and wiring?

no luck so far.... I'm still getting stuff together

[yamaslut]

check first post for more stuff!!!!!!!!!!!!!!!
.....and shipping info

[waxhead]

i am in interested in your carbs
will you ship to aussie

[yamaslut]

i am in interested in your carbs
will you ship to aussie

what carbs are you refering to????
I had three setups listed...

[waxhead]

my bad i thought you were only listing 2
the 44 and the 46
what was the other one you listed ???
i cant see it

[2lick]

Ill take the second exit nozzle so i can have maggo bore it pm me with info if you can.


Thanks-NICK

[WaveDemon]

Ill take the second exit nozzle so i can have maggo bore it pm me with info if you can.


Thanks-NICK welcome to the board!

[yamaslut]

pm sent bro....

[Whtbread]

You must have a really big garage

[WAB]

UPS guy just handed me the box with the wear ring. That was FAST!
Thanks!

[yamaslut]

You must have a really big garage

no... just a lot of **** stacked up:bigeyes: :bigeyes: :bigeyes:

[yamaslut]

UPS guy just handed me the box with the wear ring. That was FAST!
Thanks!

sweet!!!

[yamaslut]

from now on... tack on 3% if you plan on paying through paypal...

I am losing my ass on these transactions... paypal rips ya a new one.
:frown: :frown: :frown: :frown: :frown: :frown:

[Mark44]

What percent are they charging?

Mark44

[waxhead]

guess i was to slow on the carbs

[yamaslut]

What percent are they charging?

Mark44

looks like 3% (approx.)

[RMBC Freeride]

Can I buy my flame arrestors back? I'll give you $0.00 + 3% for Paypal which totals: $0.00.

How's that sound? :biggrin: :biggrin: :biggrin:

[yamaslut]

Can I buy my flame arrestors back? I'll give you $0.00 + 3% for Paypal which totals: $0.00.

How's that sound? :biggrin: :biggrin: :biggrin:


lol..... I am sending back monday... SORRY. I still need to find some
:bigeyes: :bigeyes:

[RMBC Freeride]

No problem, just razzin ya! I thought you had some lined up? I may have one more, not in as good shape as those two... I'll go digging tonight & let you know.

[yamaslut]

No problem, just razzin ya! I thought you had some lined up? I may have one more, not in as good shape as those two... I'll go digging tonight & let you know.

thanks.... been slacking on finding any...
I need to price some from Paul too

[yamaslut]

updated first page again w/ shipping info


:Banane01: :Banane01: :Banane01: :Banane01:

[Mark44]

Received my part just fine.

Thanks

[Mouthfulloflake]

I got the westcoast head a couple of days ago..

Looks great man, thanks!

[ski4]

got my carbs today man



very clean , very nice thank you very much

[BombThreat]

How much are ya lookin for that coil?

[x-jetter]

do you have any pictures of that JD rideplate?

[yamaslut]

do you have any pictures of that JD rideplate?

it's an ocean pro.... I fe'd up, sorry

[x-jetter]

even better, any pics of it, and what model? how much do you want for it?

[yamaslut]

even better, any pics of it, and what model? how much do you want for it?


it's one w/ the two fins going down the outer side of the plate... it rips hard. I ran it till about 1 year ago...

$50+ shipping

[x-jetter]

ahhh nevermind, i was looking for the one without those, that resembled the OE one a little. Thanks anyways!

[BombThreat]

How much are ya lookin for that coil?
:Banane01:

[JetSkiJunkie]

single 44mm mikuni w/ stock manifold and ocean pro FA
$80+ shipping. This carb will run a ported 701 w/ stock compression or just above stock commpression... I used it for 2 years and never had one issue w/ it... I actually never even had a primer hooked up to my ski it was so in tune... The carb comes jetted for a B pipe... of course.... sold shipping 2/10/06 or 2/11/06 at the latest

So, Does that mean it has shipped?

[yamaslut]

So, Does that mean it has shipped?

it's shipping today... sorry, I got busy in the last few days...
:bigeyes:

[yamaslut]

:Banane01:

sorry bro... $30

you realize it needs boots?????...

[BombThreat]

yeah, just the MSD ones for $4.50 that are floating around here, right?

[yamaslut]

yeah, just the MSD ones for $4.50 that are floating around here, right?

yeah....

[IceRocket1286]

slut do you have a good starter for sale or no? I didnt see one listed, but I figured Id ask. Mine took a crap, need a nice one!

and what a about a squarenose pole spring?

[Mouthfulloflake]

Nick,

Do you have photos of that stainless front exhuast outlet?

I saw them when you first started this and cant find them now.

shoot some idea of how it fits and connects, and what it looks like.

I need it.

[romack991]

Nick,

Do you have photos of that stainless front exhuast outlet?

I saw them when you first started this and cant find them now.

shoot some idea of how it fits and connects, and what it looks like.

I need it.


Sorry bro, I sent him Paypal on Friday for it and the tee.:1244: :1244: :1244:

[Mouthfulloflake]

I see how you are FAWKER...

your off my xmas list now.

Ill snag a flush mount rod holder instead...

hey..... have you found that thing to send me yet?

:biggrin:

[Glory_Freestyle]

and what a about a squarenose pole spring?

If Slut doesn't have a pole spring, I do.

[yamaslut]

slut do you have a good starter for sale or no? I didnt see one listed, but I figured Id ask. Mine took a crap, need a nice one!

and what a about a squarenose pole spring?

I don't have either.... sorry bro

[yamaslut]

I have a kawi side exhaust for sale

I also added a starter bendix to the list on the first page and a few other things...

[unclehulka13]

still have an exit nozzle? is it metal or plastic?

If its metal, pm me payment info.

[yamaslut]

still have an exit nozzle? is it metal or plastic?

If its metal, pm me payment info.

metal....

[brentR]

whats condition on them 0 degree bars?

[jetpilot701sj]

nick i sent you a PM about the hood

[Hogggman]

Still have the exit nozzles I need a metal one. What about a sj drive shaft (long)?

[WaveDemon]

hey nick, I think I'll need that ride plate shipped. let me know how much to ship to Tampa.

[yamaslut]

hey nick, I think I'll need that ride plate shipped. let me know how much to ship to Tampa.

ok..... I'll look it up

[WaveDemon]

ok..... I'll look it upI can wait until lanier if you want to drag it up there. I'm camping across from magoo's site.

[yamaslut]

I can wait until lanier if you want to drag it up there. I'm camping across from magoo's site.

I can do either my brotha

[IceRocket1286]

slut, u have a steering stop? me needs one!