Kawi 650 Pump Bearings & Bolts Needed

[retroicon]

Hey all,

I'm in need of a full set of Kawi 650 pump bearings, and the bolts that the pump to the nozzle type area ... can anyone tell me where to find these things?

[tom21]

kawi dealer- ouch

[oldschoolkawi]

ebay for the pump rebuild kit:

http://cgi.ebay.com/ebaymotors/KAWASAKI-650-ALL-PUMP-REBUILD-KIT-COMPLETE-NEW_W0QQcmdZViewItemQQcategoryZ26455QQitemZ4606335 851QQrdZ1QQsspagenameZWD1V

And a good local hardware store that sells stainless steel metric bolts, I think they are a #6 #1 pitch, but bring your old bolt or one that will fit to verify that.

[retroicon]

ebay for the pump rebuild kit:

http://cgi.ebay.com/ebaymotors/KAWASAKI-650-ALL-PUMP-REBUILD-KIT-COMPLETE-NEW_W0QQcmdZViewItemQQcategoryZ26455QQitemZ4606335 851QQrdZ1QQsspagenameZWD1V

And a good local hardware store that sells stainless steel metric bolts, I think they are a #6 #1 pitch, but bring your old bolt or one that will fit to verify that.

It's a new pump ... no old bolts :-(

[oldschoolkawi]

Then take the pump with you to verify the threads, a "good" hardware store will have a selection of metric ss bolts. Around here we have two great stores local . But usually Ace Hardware has some also.

[Wetracer]

I have all that stuff in stock. Mike
www.Northwetpowersports.com
503-585-5675

[dbrutherford]

If you need the bearings your best bet is to find someone on eBay offering a rebuild kit.

As for bolts.... There are four allens that mount the pump to the hull. Then there are two M6-1.00's which bolt the tail cone/cap on. Then there are 4 longer M6-1.oo's that hold on the nozzle.

Which bolts do you need? I have all of them you request.....


Also did you buy one os those blue printed or OEM pumps fro msweetemos on eBay?

I see some guy sellign a "special" skat-track blue printed pump on eBay now. Well is also is selling a 4130 chromoly drive shaft claimed to be made by Group K.

The parts look nice but I he is always sellign drive shafts and this is the third pump I have seen him list. I don't think those pumps were blue printed at all! I think he just sharpened the stator veins.....

[retroicon]

If you need the bearings your best bet is to find someone on eBay offering a rebuild kit.

As for bolts.... There are four allens that mount the pump to the hull. Then there are two M6-1.00's which bolt the tail cone/cap on. Then there are 4 longer M6-1.oo's that hold on the nozzle.

Which bolts do you need? I have all of them you request.....


Also did you buy one os those blue printed or OEM pumps fro msweetemos on eBay?

I see some guy sellign a "special" skat-track blue printed pump on eBay now. Well is also is selling a 4130 chromoly drive shaft claimed to be made by Group K.

The parts look nice but I he is always sellign drive shafts and this is the third pump I have seen him list. I don't think those pumps were blue printed at all! I think he just sharpened the stator veins.....

Yeah ... I got one because the pump I had in the machine was trash. They are PJS works pumps, which were nothing more than pumps cleaned up a little by PJS ...