Kawasaki ZXI parts for sale , part out

[ang4th]

Removed some parts today ...
- lower front main with kawasaki emblems on it with glove box door all in great shape ( not including on/off switch)$40
- on off switch with that specialty key on a float $25
-upper cowl part ( house the gauges ) in geat shape $40
-all gauges pod and braket $68
-right and left mirrors $45
-zxi rear grab bar $25
-steering cable $25 (add $5.00 with end ball conectors)
--750 shaft $20
-front bucket door $25
-front bucket $20, rear $10 both not pictured
-pump and impeller set up $240
-zxi start stop swith with trim switch works perfectly $40 add $10 with tether strap lanyad with whislte
- trim box with motor and cable working perfectly $255.00
small unidetified black module ( anyone know what this one is ? ) $25 ?

all prices add shipping cost plus a buck or two for paypal fees .. Money order also ok ...

I will combine parts such as the complete top housing or any other parts and sell for a little less plus save shipping costs

I still have many other parts from this hull I will take more pics as I dismantle them .. any parts request just ask ..

most part will work on different models of zxi 750 / 900 / 1100

[AlbanyMotorsports]

I need the drive shaft housing with the bearings and seals if its in decent shape.

Thanks

[ang4th]

I that part PM sent ... jetskifever

also have a 650 pump in very good sahpe $60 plus shipping bearings and shaft seem good and also included ..

[TB]

got a pic of the steering system??

[ang4th]

steering system is still on the ski .. what parts do you need the stem and handle bars ? specify what parts and yes I have it

[TB]

ok how about a pic of the underside of the steering system

[ang4th]

here is a few more pics .. of the steering .. but you cant realy see much .. if you have a 750 /900 / 1100 zxi it will work .. here is also the steering cable ..
someone wanted the hull bearing .. its just dirty in the pics .. its all good :)
best offer on all parts ..

[TB]

ok sorry for all the questions but i'm looking for a steering system for a project i got going...could you measure how far down in the hull the steering arm sits..from the top of the hull to the pivot

[ang4th]

arm is down from inside of hull about 3 inches .. i am sure it could be bent an inch up or down ..

[gorilla]

here's pic's of a 2000 zxi 1100 steering neck.

gorilla

[ang4th]

gorilla are you just showing him or trying to sell your parts here ?

[gorilla]

ang4th, all i did was post pic's that showed what he was asking for.

and no, i did not p/m him to get him to buy it from me !!!.
i don't play that way, like some of the others do here and on pwctoday.

this site is way more mature in there ways than pwctoday and some of the other web sites out there.

good luck

gorilla

[ang4th]

LOL alright no probs .. anyways I pulled most all parts today .. I will be posting pics within a few hrs .. main parts would be that trim set up ( works perfect) and the pump with impeller .. in VERY good shape near mint I would say !

[gorilla]

fyi, i still have a post with pic's on it over on pwctoday for over 2-3 months now !!!
it's a 2000 kawasaki zxi 1100 i got from another member + finished parting it out.

i have sold a few things from it too.

good luck

gorilla

[ang4th]

so basically thong bandit .. he is trying to say without actually saying he also has one to sell .. his shipping may be cheaper since I am in canada .. most parts from Canada ship only slightly higher cost .. but can take longer depending on what state you are in .. some closer to canada states can actualy ship faster such as mi and NY .. anyways I dont care gorrilla no probs .. I WOULD post my ******** available on anothers ad IF the other person has already sold thier part .. or maybe even do a PM but not directly in the thread .. but lets turn this as a positive .. hey if you have anyone needing parts Gorrilla that you already sold and no longer have ,,.. send them this linc... maybe you can help me turn this into same cash back .. long story short I bought this ski for its engine to toss into my Jetmate . it was supposed to be a totaly rebuilt engine .. tirns out the top end was fresh .. nice rebore and new wsm pistons .. to bad they must have done the top end in the hull seemed the rods were tight , crank seemed smooth .. but when i pulled out the engine pulled the fly i seen a seal blown out .. and pulled the bottom end to find a bearing fall apart ,, crazy ******** .. lucky they couldnt get it to fire ( spark problem ) other wise this thing would have blown up .. i took the top end off and even had a circlip fall on the bench ! wtf ?? anyways .. trying to get some $ back .. asking fair prices .. larger items like the top deck are expensive to ship smaller items about 20-30 .. give or take to ship .. canada post priority mail with tracking #s ,, I would like to ship the more expensive parts like the trim and pump UPS ,,, I can suck up some shipping cost on them though ...
by the way for that steering how about something like 30 or 35 bucks plus I would guess about 30 to ship because of size and weight .. you can buy gorillas if its better for you or pm me his price and i will see if i cant match it :)

[ang4th]

more pics .. torn ( no carefull uninstalled ) today :)
I was VERY happy with the condition of pump and impeller .. looks even better than I originlly thought .. and that was even good :)

[ang4th]

more pics ... also see first post for pics

[ang4th]

more pics .. cant add more than 5 per post
pump wedge for 750/900/1100 ZXI pump ( others?) $30
intake grate for zxi models .. $25
speedo sensor pickup $30
hanle bar cover .. $15 or $$5 for thong bandait if he buys steering assembly .. also have bars ..
main wiring loom .. $15 all connectors may be usefull on other models ..

[ang4th]

Bump up

[ang4th]

most of these parts now on ebay

http://motors.search.ebay.com/_W0QQsassZbarefootang

[ang4th]

Bump

[63chevyll]

trim motor?

[ang4th]

Trim motor works great !
it is listed on ebay and just hit the reserve at $199 .. I dont expect it to go much higher .. jump in at last min and take it home ...
Ihave 0 bids on the pump its reserve is also set at $199 because of its excellentshape .. but i can let it go for a little less or 195 including shipping.. IF it sells oFF of ebay and i donthave to pay those huge fees !

[clubwin7]

I am looking for the key and switch. Possibly the trim box as well.

[troy'sjetskirepairs]

Hi, Just wondering if you still have your magnetic key switch the orange on-off one with the key for a kawasaki zxi for $25? If you do I would love to buy it and I was also wondering if you would ship to Australia and if you do how much. Thanks Heaps

[ang0420]

call angela i want to buy 900zxi trim motor 255.00
586-524-8448

[ang0420]

call angela i want to buy your trim motor 900zxi 586-524-8448

[dickboh]

more pics .. torn ( no carefull uninstalled ) today :)
I was VERY happy with the condition of pump and impeller .. looks even better than I originlly thought .. and that was even good :)
How much do you want for the housing and impeller

[dickboh]

Will offer $250 for impeller and housing

[ang4th]

hey guys this is a OLD thread .. pump and many parts sold .. trim motor SOLD ..

Iactullay have a few parts left though thansk for reminding me LOL .

I have

- the two top cowls icuding teh one with small glovebox ..
- intruments
- front and rear buckets
- rear grab handle
- front hatch with hardware
-ride plate
- pump shim
-