Kawasaki 650 - 800 Aluminum Engine Cradles

[jetskihaven]

I have a sample of the first one that has come off the machine line this week. These will be ready to be shipped sometime next week.

WHY ALUMINUM?
3 Reasons:
1. BLING BLING for the ski.
2. It is 2.8 pounds lighter than stock from the OEM 650 Kaw. Cradle.
3. It will not rust and leave rust stains in the bottom of the hull.

TECH INFO.:
The thickness of these are as follows: .35" or 8.9mm if I am correct I think that is 5/16" thick.
THESE ARE MADE FROM 6061-T6 ALUMINUM STOCK.
This is what most marine race boat aluminum parts are made out of.

HARD COAT ANODIZE will be available for better corrsion resistance as soon as I can get a price and contract approved. At this time they are raw aluminum that will have a polished finish ( a little shinier than what is in the pictures).

To see what some of the other riders think click here: http://www.pwctoday.com/showthread.php?t=149166

I am making these available to all the form members for $150.00 + 12.00 s/h each in the lower 48 US. These will be marketed in several locations for $225.00 and up + s/h.
If you want one please send me a paypal payment to john@jetskihaven.com and as soon as I get them next week I will be shipping them out. Please note what the payment is for, so I get what you ordered sent to you.

We are developing several other trick performance parts that will be available soon for the freestyle and X2 enthusiest.
Let me know.
Thanks,
John - Jet Ski Haven
www.jetskihaven.com

[waterfreak]

can you make a adapter plate for the yamaha 800 to fit in a sj? you would be a "star"

[snuffysmith]

they look pretty nice. you can sample one to me and ill write reviews on them yo let you know how they are holding up....lol

[jetskihaven]

they look pretty nice. you can sample one to me and ill write reviews on them yo let you know how they are holding up....lol


U- BET for $162.00 LOL

[snuffysmith]

U- BET for $162.00 LOL



well worth a try, ill have to come up with some money to get a few or these from you.:notworthy:

[jetskihaven]

can you make a adapter plate for the yamaha 800 to fit in a sj? you would be a "star"

I would need both the SJ and an 800 engine cradle or engine to motor mount brackets to disign one.
What is the market for one of these? Would it only be good for the guy putting an 800 in the SJ?

[SUPERJET-113]

What is the market for one of these? Would it only be good for the guy putting an 800 in the SJ?

Or anybody wanting to put the 800 in any Yamaha PWC that has a 650/701/760. The 800 is 120 HP in stock form.

BTW - Those look nice and remind me of the old skool Ocean Pros.

[jetskihaven]

I have the OEM brakets for the 650-760. I will see about locateing the 800 brakets and we will see what happens. Thanks,

[waterfreak]

I have the OEM brakets for the 650-760. I will see about locateing the 800 brakets and we will see what happens. Thanks,

http://www.waterdawgkustomz.com/1200.php Here's one that WDK makes. Alot of peeps here are looking for easy and inexpensive set up.

[Vumad]

Did you buy the molds from ocean pro?

[jetskihaven]

Did you buy the molds from ocean pro?

MOLDS for what??

[jetskihaven]

There maybe some engineering changes to this to insure the integrety of this part. We are warranting them so I do not want to have any problems.
Thanks,

[jetskihaven]

I also should have mentioned that I am having some fiberglass parts made for the X2. This is the first one that needed a small change made to it and it will be available soon for $200.00 + s/h.
The steering / console trim piece.

email me at john@jetskihaven.com if you want me to notify you when these become available.

[Vumad]

The bed plate looks like an ocean pro bed plate with another name stamped on it. I was juts asking out of cuiosity if you developed the plate or bought it from OP.

I like that part for the X2. It's nice.

[jetskihaven]

The bed plate looks like an ocean pro bed plate with another name stamped on it. I was juts asking out of cuiosity if you developed the plate or bought it from OP.

I like that part for the X2. It's nice.


The engine cradle is a take off of the OP cradle except for a few changes that we have done to make these work better with the higher horse power engines.

[jetskihaven]

Man these are selling good. I have about 30 more oders that I need to complete this first run. So let me know who else is interested.

Thanks,
John - Jet Ski Haven
www.jetskihaven.com

[jetskihaven]

...........bump..............

[jetskihaven]

............ Bump ............

[vomitspot]

these fit the sxr ?

[jetskihaven]

these fit the sxr ?


YES they do!!!

[theskiclinic]

http://www.waterdawgkustomz.com/1200.php Here's one that WDK makes. Alot of peeps here are looking for easy and inexpensive set up.

what is wrong with the kit that waterdawg sells ??

[jetskihaven]

Well I am headed to Daytona, Fld. to the freestyle ride going on this week-ed. If you need to contact me you will have to call at 225-612-5540. I will not be back until tuesday the 15th.
Look me up if you are their, I will have some of these items their too if you would like to see them first hand.
Have a good week-end.
John - JSH

[jetskihaven]

Hello everyone, Well I am back please feel free to contact me.

I had a great time in Daytona. I met a lot of people from this form site there and I am looking forward to next ride in April the 26-27 in Pensacola, Fl.
I plan on bring some of our finished project skis there ('86 Kaw 550 with a PJS 850, '91 X2 with all the new trick stuff that we are working on ///Look for our new Up-Trim System for the X2////.
I might evan work out a way to do some test drives on one of the loaded tricked out X2's that I hope will be there.

Some of the engine cradles were sent out today and all the others that have paid will be out tomorrow except for one that is getting anodized.

I will be getting some pics posted of GASSEMS X2 soon with some of the cool products coming up for the X2 lovers.

Thanks,
John - Jet Ski Haven
www.jetskihaven.com

[jetskihaven]

Here are a few pics of Jeff's (GASSEM) X2 with some of the new trick parts coming available for the X2 guys.

[jetskihaven]

Ok!!!
I have about 20 of these engine cradles shipped. I need some + or - feedback.
Please post it here or email me at john@jetskihaven.com or call me at 225-612-5540 and let me know what is happening with these.

[jetskihaven]

The X2 Fiberglass Trim pieces are ready. $225.00 + s/h
I accept paypal payments to john@jetskihaven.com
The pics are the trim pieces fitted on a X2 at the fiberglass shop.
Let me know who would want one.

Thanks,
John - Jet Ski Haven
225-612-5540
www.jetskihaven.com
john@jetskihaven.com

[jetskihaven]

The trim pieces are now posted on Jet Ski Haven's web site
If you prefer to purchase these with a credit card you can do so here, click on this link:
http://www.jetskihaven.com/jetskipro...hp?prodnum=599
I also accept paypal payments to john@jetskihaven.com
$225 + s/h.
Let me know how I can help

-----------------
Thanks,
John - Jet Ski Haven
225-612-5540
www.jetskihaven.com

[jetskihaven]

Here is the updated version of the new Kaw 650 - 800 engine cradles.
I just got these back from the anodizer and I will have blue and purple available soon (in about a week).
These have been tweeked and tested before they are shipped to fit with no fitment or engine touch issues.
Let me know what color you need and how many.
Form Member price $165.00 + s/h
The price is $15.00 more than what I charged to cover the anodize work.
If you bought one of the first one and you have not sent it back, please send it back with a note in it for the one you want to replace it with and I will get it out asap at no extra cost.

[spork]

Wow those look sweet! Nice work.

[jetskihaven]

I still have a few of these left. If you do not get one now I am sure I will sell what I have left in Pensacola, Fl. at the Chicken Bone Ride.
I will try to have more in 4-6 weeks.

[jetskihaven]

Pics of the Purple and Blue Engine Cradles..

Well I tried but the attatchment section here has been turned off.
If you need a picture of the any of these please email me at john@jetskihaven.com and I will email you them.

[StandUpOrShutUp]

Do you happen to have ANY left at all?

Thanks. And nice work!

[jetskihaven]

Do you happen to have ANY left at all?

Thanks. And nice work!

Yes I do, what color are you wanting?

[cattledog]

any bedplates to install yam 701 in stock x2 hull?

[jetskihaven]

any bedplates to install yam 701 in stock x2 hull?

No not yet. I am still trying to get over the first hup on the Kaw ones. But I am sure I will have a proto type for Terry at WeDoSea-Doo to work with soon.

[jetskihaven]

Bump......... I still have a few more of these in Silver, Black and Red.

[jetskihaven]

any bedplates to install yam 701 in stock x2 hull?

If anyone is interested in Jet Ski Haven starting production on the Kaw/Yam cradles. I will start on these immediately after I can get the first 25 orders with a $100.00 deposit per order. I will produce a limited amount of 50 of these.

The final price for these before shipping will be $165.00 - $185.00 depending on the total cost to do these up.

[jetskihaven]

Jet Ski Haven has now added a new page to their web site called the "HOT DEALS" page.
This page will feature all the item that are on sale.
To be directed to this page Click the link Below:
http://www.jetskihaven.com/jet-ski-parts-hot-deals.php (http://www.jetskihaven.com/jet-ski-parts-hot-deals.php)

Thanks for looking!!!!!

[jetskihaven]

Thanks Walt for the payment on a black Aluminum Engine Cradle.
I will have this shipped out first thing Monday.

I only have 1 black one left and 4 red ones.

[Twinturbostang]

No more alum color ones?

[madscientist]

the black and red are super pimp in person. i am running the blue 1.

[Twinturbostang]

Ya I need to make a big order but i am holding off a week. In that order i need 3 of these.

[jetskihaven]

Ya I need to make a big order but i am holding off a week. In that order i need 3 of these.

You better come on and get them, I have one black one and three red ones.
Let me know what I can do to help.

[jetskihaven]

I have a fresh set of Aluminum Engine Cradles in.

Click on the links below for picture, colors and prices.

http://www.jetskihaven.com/jetskipro...p?prodnum=3634 (http://www.jetskihaven.com/jetskiproduct.php?prodnum=3634)

http://www.jetskihaven.com/jetskipro...p?prodnum=3635 (http://www.jetskihaven.com/jetskiproduct.php?prodnum=3635)

http://www.jetskihaven.com/jetskipro...p?prodnum=3636 (http://www.jetskihaven.com/jetskiproduct.php?prodnum=3636)

http://www.jetskihaven.com/jetskipro...p?prodnum=3637 (http://www.jetskihaven.com/jetskiproduct.php?prodnum=3637)

http://www.jetskihaven.com/jetskipro...p?prodnum=3638 (http://www.jetskihaven.com/jetskiproduct.php?prodnum=3638)

Get them while I have them in stock..............................

[jetskihaven]

,,,,,,,,,,,,,,,,,, :pancake:,,,,,,,,,,,,,,,,,,,

[madscientist]

market sux right now!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[jetskihaven]

market sux right now!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


Why is that, it is still going good here. I hope it stays that way too. :bump:

[madscientist]

hard to sell anything on here lately. i'll call you tomorrow