Best cone for a freestyle B1

[DCRocks]

I searched the threads, but couldn't find anything. :grumble:

Ski specs:

701 - 61x - Single SBN 44
RIVA Girdled Head / 35cc Domes - Factory B Limited Pipe

I am looking to get a solaris 13-18 solas impeller

Anyone have a recomendation for the best cone to get for freestyle?

Hopefully one I could bolt onto my stock impeller, as well as the solas one.

[bad93blaster]

i did know you had a choice on nose cones

you might want to go with a 12/17 skat mag prop with a tbm pump stuffer

or a solas 13/17 cut back 3mm with a wetwolf pump cone

[DCRocks]

Heh... :laughing:

I am not sure if "nose cone" is the correct term, but it is the peice that fits on the end of the impeller.

I wanted to pickup this one (Fsyam) (http://www.wetwolf.com/yam/), but it is listed as out of stock.

[SJKny]

Heh... :laughing:

I am not sure if "nose cone" is the correct term, but it is the peice that fits on the end of the impeller.

I wanted to pickup this one (Fsyam) (http://www.wetwolf.com/yam/), but it is listed as out of stock.

That's just the Freestyle cone..... search threads around here and you'll find it's better to just run the right prop and bore the nozzle. Cheaper alt.

[sflsurfrider]

That's just the Freestyle cone..... search threads around here and you'll find it's better to just run the right prop and bore the nozzle. Cheaper alt.

agreed.

[Prem1x]

Boring the nozzle is permanent, unless you got spare nozzle. The Wetwolf Freestyle cones work great.

I would stick on your blaster no matter what prop you run.

The TBM pump cone is a much more expensive alternative. It comes with a stubby cone too, but it will process water much better, almost as good as a mag pump. also, if you do bore your nozzle, the TBM stuffer comes with 3 sizes of cones.