wtb accusteer and 659 factory pipe head pipe

[cattledog]

for 650 x2

[crab]

659 factory pipe head pipe ???????

[sflsurfrider]

i think he meant 650

[crab]

i think he meant 650
In that case, get one for a 750. Its already enlarged to 47mm, but is too big for a stock ex. manifold however.

[cattledog]

i meant 650 00ps

[shawn_NJ]

In that case, get one for a 750.


Right, if you order a new one from factory 650 and 750 headpipes all come 47mm. If you are not buying new, try to find a 750 headpipe.

[cattledog]

hey crab on the factory pipe it says the headpipe is the same for 650 and 750?

[sflsurfrider]

arent they the same as any other b head pipe?

[crab]

arent they the same as any other b head pipe?
Kawi headpipe is an "A" headpipe.

[cattledog]

have 650 chamber, if i buy kawasaki A headpipe can i use stock exhaust manifold

[crab]

Dicy, not much meat on that casting on top, best find a Westcoast solid top.

[cattledog]

thanks how much for your head pipe, x2 guy has aftermarket exhaust manifold that i can buy

[sflsurfrider]

Dicy, not much meat on that casting on top, best find a Westcoast solid top.

no doubt

[crab]

Call FPP, they should be around $230.

[cattledog]

thanks, with this pipe, milled stock head ,15 prop 38 mm carb it should be a pretty good setup. the ski has 145 psi compression just bought it last week .

[sflsurfrider]

38mm? :nono:

put a 44 on that sumbitch!

[cattledog]

your right it came with new 38 that the kid could not figure how to hook up the throttle cable, i think i will go with 44 it has a dg intake manifold would i need diferent intake manifold for 44mm

[WDKfan]

I have an accusteer if you want it pm me its brand new and still in the bag

[X2guy]

I'm running the stock manifold bored out to 47mm. Works fine for me. I couldn't get my westcoast to fit properly. I do have that other manifold if your interested in it cattledog.
You'll need a new manifold for the 44 as it's a mikuni.

[Vumad]

How about I sell you my accusteer and then I go buy a new one that's not a piece of shat. :haha:

[cattledog]

i guess u dont like accusteer what happened to yours . just got my x2 and steering is vey loose, did not take it apart yet to study it.everybody else has them on their x2. going to keep 650 motor like u did how was your ski reliable with mods that u did, they do look sexy

[Vumad]

There's nothing wrong with it. It's just loose. It came with the ski and I can't get it apart to fix it up.

[cattledog]

did u get ski in water yet looking for 44mm carb

[Vumad]

No. I'm cleaning everything up and painting before it goes together. I'm tired to having shat slapped together and my friends talkin' shat. Time for a nice ski. Should be in the water in 1-2 weeks at this rate.

[cattledog]

paid 100 dollars for my x2 person lost interest and did not run for 7 years has 145 compression, i have ridden a mod 650 and they r great. u r lucky u live in floridia ski all the time i go in winter to sarrasota have family their . i want to have my going by then good luck keep posting i would like to see it when finished. any parts u like to sell 44mm carb?

[Vumad]

I wont be selling the Mikuni.

[shawn_NJ]

I'm running the stock manifold bored out to 47mm. Works fine for me. I couldn't get my westcoast to fit properly.

Same here.