Pics of my Latest X-2 Mods!

[BlueBreadTruck]

I just finished yesterday. I lost my fuel door and cracked my hood, so I filled in the area, and smoothed the fuel door, fixed the hood and repainted. I also bought a new hydroturf seatcover.
http://www.supermotors.net/getfile/573962/fullsize/2007_1013(001).jpg
http://www.supermotors.net/getfile/573963/fullsize/2007_1013(003).jpg
I got some pics of my trim system, i just used a bmx lever, cable and a thick peice of stainless i found from an old ss/xi couch...i drilled and tapped some holes to the aluminum and it works great.
http://www.supermotors.net/getfile/573965/fullsize/2007_1013(005).jpg
http://www.supermotors.net/getfile/573966/fullsize/2007_1013(006).jpg
here are my footstraps....they work great and are VERY strong...I havent got them to pull out yet and ive put tons of force on them. I drilled through the outer rail and on the inside I did the washer welded to the acorn nut trick and glassed them to holes I drilled into the footwells.
http://www.supermotors.net/getfile/573964/fullsize/2007_1013(004).jpg
riding at the local lake with my brother and his 750 x2
http://www.supermotors.net/getfile/573967/fullsize/2007_1013(013).jpg
http://www.supermotors.net/getfile/573968/fullsize/2007_1013(017).jpg

[Idok]

very nice!!!

next mod.....have the steering machined for a set of fat bars (pro-tapers)

[dbrutherford]

Looks good!

One recomendation I have. Find a cheap Kawasaki 650 SX start/stop switch. Then swap out the internals of your X2 switch to the Kawasaki 650 SX one. You will have ot cut of the ends where they plug in the e-box and resoilder on new ones.

BUT... you won't have that post where the X2 choke cable hooks up to which can stab a hold in your leg. OUCH!

I did this mod but haven't finished it... typical me....

I have an Acusteer machined for fat bars. I will post pics later.

[BlueBreadTruck]

I might just take my cut-off wheel and cut that stupid post off. thanks guys

[wadman]

looks good. how much longer do you ride? it is so cold here.

[BlueBreadTruck]

I ride all year....maby take a few months off in the deep winter. The ocean is still warm....no need for a wetsuit on the south side.

[Legdragger]

Those X2's are sweet! You did a really nice job.

[X2 RAGS]

i love that yellow x2.......

[cattledog]

thanks for pictures not sure what colour i am going to paint my x2 but yellow is really nice

[sflsurfrider]

i like the trim setup. does it give the full range of motion at the nozzle? do you have a pic of the nozzle in the relaxed position? i may have to do this on our 750 x2

[JeffX2&SX]

Nice X2s, did you do the hood mods?

[shawn_NJ]

Kyle, have you tried a DCUT plate on your ski? It was a nice improvement on mine.