SFL's 96 SJ buildup thread

[sflsurfrider]

just picked this baby up just before daytona and so far i cut out the 24/7 footholds, defoamed, installed a new xmetal scupper, installed WCF's new footholds, refoamed, beefed up the bond line inside the hull.

im in the middle of turfing the ski right now and in the immediate future im getting a brand new xmetal pole setup w/ WCF chinpad. custom graphics from exotic signs and a new WCF hood kit is in the not-too-distant future as well.

i still have to reinforce the insides w/ kevlar carbon fiber which will happen immediately after turfing.

any comments or suggestion are welcome.

here are some pics

[sflsurfrider]

more pics

[Matt_E]

Did you reinforce the sides in the back when you had the back cut open?
Did you cut the turf yourself?

[sflsurfrider]

yes and yes :biggrin:

[Matt_E]

Good deal. I just got done reinforcing the back end of mine. Unfortunately, I am still working on buttoning it back up.
Someone should teach me how to cut my own turf. Do you make a template?
Or do you just sort of...cut as you go?

[Waste Land]

Good deal. I just got done reinforcing the back end of mine. Unfortunately, I am still working on buttoning it back up.
Someone should teach me how to cut my own turf. Do you make a template?
Or do you just sort of...cut as you go?

Most spend their first turfing time cutting perfectly, then when it matches great, make templates.

[sflsurfrider]

i traced steves last mat kit, before he sold it, onto a big piece of cardboard. what a timesaver that was. priceless.

[waterfreak]

i traced steves last mat kit, before he sold it, onto a big piece of cardboard. what a timesaver that was. priceless.

You're a star!:woot: :arms: That's gonna cost you some CL's:Banane01:

[sflsurfrider]

You're a star!:woot: :arms: That's gonna cost you some CL's:Banane01:

does that mean i get to keep the templates?:woot:

[sflsurfrider]

oh, and i forgot to glass up the holes in the dash before i brought it home for turfing today. no biggie. i didnt get that far anywho

[2nd nature]

is that the 1" thick pad your using ? im about to order mine and want something nice and soft

[sflsurfrider]

nope. we were supposed to get the 1". its on the invoice and we were billed for it though. im not done foaming the tray area. im going to double (maybe triple in some spots) up the foam in the footholds before applying the turf. i love turfing!

[butti]

my best canadian impression>>>>lets hear about the powerplant eh

[sflsurfrider]

my best canadian impression>>>>lets hear about the powerplant eh

glad you asked! im going to put the engine from my spongebob squarenose into it. it is:

61x cylinder STD bore ported by WCF
62t cases
WCF modified 48mm single mikuni on a riva intake
stock F/A
B pipe
TDR waterbox
MSD enhancer
riva girdled head @185/187 psi
concorde 13/17

this engine hits nice and strong at the bottom and has no dead spots all throughout the throttle range. very peppy. it feels nice in my heavy square. i cant wait to feel the power in my round!


oh, and i have to add a second exhaust. thanks for reminding me!:woot:

[unclehulka13]

3 things wrong.

1. There arent enough rivets (you gotta put em every 3cm.)
2. You didnt complain enough about how they didnt fit perfectly, and how they were cracked.
3. You didnt post enough pictures about number 2.

:biggrin: :biggrin:

[335]

3 things wrong.

1. There arent enough rivets (you gotta put em every 3cm.)
2. You didnt complain enough about how they didnt fit perfectly, and how they were cracked.
3. You didnt post enough pictures about number 2.

:biggrin: :biggrin:

:arms: :arms: :arms:

[sflsurfrider]

3 things wrong.

1. There arent enough rivets (you gotta put em every 3cm.)
2. You didnt complain enough about how they didnt fit perfectly, and how they were cracked.
3. You didnt post enough pictures about number 2.

:biggrin: :biggrin:

:snort:

ya think i should start a new thread?:Banane01:

[IceRocket1286]

hey man, i was gonna make the rivets comment. fun wreckers.

[unclehulka13]

haha, im glad we can poke fun here and not have someone complaining.

[hangtime]

As long as they fit good and you use enough epoxy you don't need rivets.
I'm only saying that cause I didnt use any on mine ,hope they dont fall out :17:

[Matt_E]

The rivet thing wasn't serious....it's sorta long to explain.

[Prem1x]

I must be retarded because it looks like the same 1" underpad that I got.

[IceRocket1286]

haha, im glad we can poke fun here and not have someone complaining.


ya, were all grown up. well, some of us our still trapped in kids bodies, but who isnt a kid at heart? lol. no need to whine. live you learn.

[waterfreak]

ya, were all grown up. well, some of us our still trapped in kids bodies, but who isnt a kid at heart? lol. no need to whine. live you learn.

Well said!:arms:

[sflsurfrider]

just found a "before" pic from my phone.....:scared:

[335]

just found a "before" pic from my phone.....:scared:

Steve actually lets you hang around his shop?!?:biggrin: :bigeyes:

[waterfreak]

Steve actually lets you hang around his shop?!?:biggrin: :bigeyes:

He's actually in charge of waste disposal! lol:trink26: :Banane35: :Banane35: :friday:

[sflsurfrider]

He's actually in charge of waste disposal! lol:trink26: :Banane35: :Banane35: :friday:

steves not kidding! he goes through enough recyclable beer containers to support even the worst jetski junkees habit. oh, and i got this 96 hull out of there too.

[335]

steves not kidding! he goes through enough recyclable beer containers to support even the worst jetski junkees habit. oh, and i got this 96 hull out of there too.

Is the hull "reinforced" with Coors Light cans?!?!?:cool2:

[Big Kahuna]

what is that purple mess on the side rails.

[sflsurfrider]

Is the hull "reinforced" with Coors Light cans?!?!?:cool2:

not cans. glass bottles. come on chick. im glassin!

[sflsurfrider]

what is that purple mess on the side rails.

those are rail extensions. they will be getting turfed over. its so my feet dont fall off when im doing gay hood tricks.

[sflsurfrider]

update:

the entire nose section is now reinforced w/ 2 layers of 1208 biaxial and 3 layers of 1208 getting sandwiched between the bracket and backing plate.

also. i reinforced the area underneath the hood seal/lip on the inside w/ mat and 1208 biaxial for additional strength (obviously) and to make a smooth transition for the carbon/kevlar thats going on the inside walls.

to be continued.....

[sflsurfrider]

more pics. sorry about the quality..... cameraphone cameras suck azz!

[butti]

sure are alot of couches around there:ponder:

[sflsurfrider]

why dont my images just show up w/o having to be all clickin on em? yo?:aargh4:


:smoker:

okay...

im ready to do the side reinforcements which will be 1208 biaxial laid with epoxy then carbon/kevlar. same with the firewall. then ill install the xmetal side exhaust.

my new xmetal pole setup should be arriving wednesday. woot.

the hood pictured is steves, but ill be putting one on my ride. its a sweet hood.

after that, im driving it up to exotic signs (about 1/2 hour away) and have paul put a custon graphics kit on it.

its starting to come together. all i really need is an intermediate housing.

:bananalama:

[sflsurfrider]

sure are alot of couches around there:ponder:

thats steves shop. he fixes couches too. :scared:

HES WORKING AGAINST US!:lame:

[sidram]

Originally Posted by bigkahuna
what is that purple mess on the side rails.

it is what is left over afte rthey drink the GL's

[sflsurfrider]

Originally Posted by bigkahuna
what is that purple mess on the side rails.

it is what is left over afte rthey drink the GL's
:ugh2:

[WAB]

BIG step up from the old pink 440! :biggrin:
Looks great

[sflsurfrider]

uh thanks

[sflsurfrider]

wcf chinpad pics - actually, steve just laid the gelcoat and glass then threw it in the trashcan because it was a blem:bigeyes:


i yanked it out of the can, trimmed it, reinforced it with 1/4" aluminum for gay hood tricks then turfed it:headbang:

blem my ASS!

[Rickster]

Have you gone rivet mad son?:bigeyes: or are you actually expecting to get your big arse on there.:biggrin:

I would hate to see your footholds,,,:Banane01: :smashfreakB: :Banane13:

[sflsurfrider]

Have you gone rivet mad son?:bigeyes: or are you actually expecting to get your big arse on there.:biggrin:

I would hate to see your footholds,,,:Banane01: :smashfreakB: :Banane13:

dude, your ass is way bigger than mine.:bigeyes:

and, please, no more rivet jokes. theyre getting really old, man. i scraped my elbow. WAH!

[Rickster]

:nana: :grouphug:

[waterfreak]

I don't think I was putting it in the trash! Don't want to start a new trend "dumster diving at the Watercraft Factory"

[sflsurfrider]

I don't think I was putting it in the trash! Don't want to start a new trend "dumster diving at the Watercraft Factory"


uh, yeah.... actually you did put it in the trash... or maybe i mistook the trashcan for your workbench?:boggled:

[sflsurfrider]

steering cable is in. intermediate shaft and housing is in. chinpad is installed. my hood and liner are @ WCF getting put together. steve will have it done by the end of the week. RIGHT STEVE?

after that, im driving the ski to paul @ exotic signs for a custom, never seen before graphics job.

then i start with the transferring of engine, pump, waterbox etc from the square to the round.

i should be in the water the weekend after this coming weekend if paul isnt too backed up w/ work.

:woot:

[Rickster]

Sweet....

It's time for a farewell ride on the sponge bob on Friday! you in?:arms:

[sflsurfrider]

bilge pumps are in! it sucks working on a ski 30 - 60 mins at a time!

Sweet....

It's time for a farewell ride on the sponge bob on Friday! you in?:arms:


got tons of work to do... cant do it this week. plus, my last ride last week may have been my last ride on it. the handlepole area is cracked from daytona. also, i might need to strip parts off of it, for the roundie, that i didnt anticipate (small stuff). so i might be on my x2 or riding wifeys spongebob this weekend.:bigeyes:

where ya riding anyway?

[Rickster]

I was going to hit the normal canal out west, or maybe Green lake if that is fenced off.

Waterfreak, you in?

[sflsurfrider]

had a few minutes to set the bilge pumps in, install the switch and connect the wires and hoses.... and snap a few shots.

[njfl]

I was going to hit the normal canal out west, or maybe Green lake if that is fenced off.

Waterfreak, you in?

No he's not. I got Steve all day on Friday to align my hood and do my turf:wink: Right Steve?

Joe

[sflsurfrider]

hey joe.... got a couple extra hood thangs fo a crakkuh??

[njfl]

No, I only have the one set we are using tomorrow. The others weren't done yet. Same situation as you, but I am going up there on Tuesday or Wednesday. My guess is that he will do all the reinforcings at once.

Looking forward to meeting you.

[butti]

thats a pretty nice hood in the garbage can !:cool2: :thinkerg: you should put it on yer ski!!:icon16:

[sflsurfrider]

thats a pretty nice hood in the garbage can !:cool2: :thinkerg: you should put it on yer ski!!:icon16:

one mans :thumbsdown:



is another mans :biggthumpup:





j/k, this hood is NOT a blem! i just put it on the can and snapped a pic strickly for humor purposes only. steves not laughing so it worked:biggrin:

[PancakePete]

one mans :thumbsdown:



is another mans :biggthumpup:





j/k, this hood is NOT a blem! i just put it on the can and snapped a pic strickly for humor purposes only. steves not laughing so it worked:biggrin:

That pic is funny looking ! Looks like that white SJ is mint !

[Rickster]

No he's not. I got Steve all day on Friday to align my hood and do my turf:wink: Right Steve?

Joe

That's OK, we went riding yesterday....:Banane01: :Banane01: :Banane01:

I'm dropping bye Steve's today to see what I can find in the garbage can, maybe I'll see you there.

Charlie, that skie is going to kick arse, I can't wait to lose the hood on it, I mean test ride it!:scared: :biggrin:

[sflsurfrider]

Charlie, that skie is going to kick arse, I can't wait to lose the hood on it, I mean test ride it!:scared: :biggrin:

:nono: :23: :ugh: :smashfreakB: :biggrin:

[sflsurfrider]

just took the engine out of my square today. going to bore and put some fresh pistons in it.

heres the hole it came out of.:scared:

[hangtime]

Did you have a fire in there :biggrin:

[sflsurfrider]

Did you have a fire in there :biggrin:

2 per revolution :439:

[douglee25]

What died in that engine compartment? :)

Doug

[sflsurfrider]

What died in that engine compartment? :)

Doug

its what died on the inside AND OUTSIDE of the engine compartment... that 90 SJ!
---------------------------------------
UPDATE!:arms:

i put in the TDR box (from the square), TEE fitting (xmetal), rear exhaust hose (2 2/8" i.d. marine exhaust hose), front exhaust hose (discount auto parts flexible 1 3/4" radiator hose) and motor mounts today. :arms: :arms:

....and steve glued my liner and hood together today.
before he put the handcups in, i turfed the entire inside area against the inside of the hood. thats always a bitch to get at when the hood is all together. the inside of my handholds are shiny black carbon fiber! :arms: :arms: :arms:

ill try to remember to bring the camera tomorrow. :werd:

[sflsurfrider]

pickzs

[335]

pickzs

Looking Good, Charlie!!!

That TDR is going to be one noisy sumbitch. :bigeyes:

[hangtime]

if that pole was stock I'd swear it was my ski .
looks nice man ,what's with the bilges going into the tray area ?I don't get why you would put it there .
I'm sure there has to be a good reason :wink:

[sflsurfrider]

Looking Good, Charlie!!!

That TDR is going to be one noisy sumbitch. :bigeyes:

actually, that tdr is what i was running in my square. its not too bad.


they have two models:

kinda noisy & noisy sumbitch.

mines only kinda noisy. :biggrin:

-------------------------------------

hood should be done tomorrow or friday. as soon as its done, the hooks and locks are going on then it goes to paul at exotic signs..

just got my cylinders bored for some new pistons today:arms:

i can be in the water this weekend but i think ill wait till after the graphics. thatll give me a week to re-assemble abd install the engine instead of a day or 2.

[sflsurfrider]

if that pole was stock I'd swear it was my ski .
looks nice man ,what's with the bilges going into the tray area ?I don't get why you would put it there .
I'm sure there has to be a good reason :wink:

i would never put a pwctoday sticker on anything i own.


the bilge outlets are 45's, so they point overboard. most people put them in the holes that the choke and fuel valve were on the "dash".

[waterfreak]

actually, that tdr is what i was running in my square. its not too bad.


they have two models:

kinda noisy & noisy sumbitch.

mines only kinda noisy. :biggrin:

-------------------------------------

hood should be done tomorrow or friday. as soon as its done, the hooks and locks are going on then it goes to paul at exotic signs..

just got my cylinders bored for some new pistons today:arms:

i can be in the water this weekend but i think ill wait till after the graphics. thatll give me a week to re-assemble abd install the engine instead of a day or 2.

Slacker!!!!! get that bitch done and in the water this weekend!

Alky:trink26:

[335]

actually, that tdr is what i was running in my square. its not too bad.


they have two models:

kinda noisy & noisy sumbitch.

mines only kinda noisy. :biggrin:



AAaahhhhhh, that explains it---mine was the noisy sumbitch model. :cool2:

[hangtime]

i would never put a pwctoday sticker on anything i own.


the bilge outlets are 45's, so they point overboard. most people put them in the holes that the choke and fuel valve were on the "dash".


Ahhh ,at a 45 and use the existing holes I got ya .:cool2:
Must look cool when you turn em on like that
Your banned from having those stickers on your boat is what you mean :wink:

I always wanted to get rid of the fuel valve ,what do you do with that ??

[njfl]

Charlie, consider getting the Tee welded to the waterbox to make it clean and minimize chance of leaking. You have that welder guy right around the corner. Take the B headpipe when you go too already :aargh4:

[sflsurfrider]

Ahhh ,at a 45 and use the existing holes I got ya .:cool2:
Must look cool when you turn em on like that
Your banned from having those stickers on your boat is what you mean :wink:

I always wanted to get rid of the fuel valve ,what do you do with that ??

just run the fuel line from the reserve tube straight to the carb (with a filter of course). it eliminates about 10 feet of fuel line in your ski and eliminates a potentially cloggable/leaky/whatever valve.

[sflsurfrider]

AAaahhhhhh, that explains it---mine was the noisy sumbitch model. :cool2:

exactly. yours had, what they refer to as, NO BAFFLES.:cool2:

[sflsurfrider]

Slacker!!!!! get that bitch done and in the water this weekend!

Alky:trink26:

you just want me to finish mine so i can show you how to build yours. shut up. have a seat at the bar. your number will be called.:werd:

better yet, FINISH MY HOOD! i couldve paid waterdawg 2 years ago and had my hood done by YESTERDAY! psssh! whos the slacker, again?

:beerchug:

[sflsurfrider]

Charlie, consider getting the Tee welded to the waterbox to make it clean and minimize chance of leaking. You have that welder guy right around the corner. Take the B headpipe when you go too already :aargh4:

i thought about welding the tee to the box. i might do it after i have everything situated and know EXACTLY where the box and tee should be in relation to eachother. after the battery, pipe, tank etc is installed, the position may need to change. its much easier to make that change with a piece of hose vs a welded setup. also, like steve says, its just an oem ski..... who cares about clean?

also, i was considering welding a second outlet on the front of the waterbox and eliminating the tee altogether, but with the exhaust tube i used, id still need a 90* fitting, so i figured, WTF, put the tee.


bolt had been extracted from manifold today - cylinders bored too

[butti]

exactly. yours had, what they refer to as, NO BAFFLES.:cool2:


and now idok runs that very waterbox in his ski FRONT EXAUST ONLY:bandit:

i like to think it keeps the sharks away:fingersx:

[335]

and now idok runs that very waterbox in his ski FRONT EXAUST ONLY:bandit:


:bigeyes: Good thing he's not an ear, nose, and throat specialist. :biggrin:

[butti]

:bigeyes: Good thing he's not an ear, nose, and throat specialist. :biggrin:


badump bum ch <<<rimshot

[njfl]

also, like steve says, its just an oem ski..... who cares about clean?


Don't listen to Steve. I'm still in love with my 2001 SJ. I don't think of it as my backup ski, I think of it as my other ski. I will continue to give it just as much love as my WF ski.:27:

Keep up the progress.

[waterfreak]

you just want me to finish mine so i can show you how to build yours. shut up. have a seat at the bar. your number will be called.:werd:

better yet, FINISH MY HOOD! i couldve paid waterdawg 2 years ago and had my hood done by YESTERDAY! psssh! whos the slacker, again?

:beerchug:

That's funny, you said paid!:loser:

Let's go charlie, you gotta a lot of work to do on that build off boat:friday:

BTW you're welcome for all the help on your ski:slap:

[sflsurfrider]

is it like that?!

[sflsurfrider]

:headbang:

[Rickster]

Dude, that is kick arse!!!:woot: :arms: :headbang: :Banane01:

I can't wait to see it on the water! Good job!

[335]

Charlie---that ski looks AWESOME. :Banane01: :woot:

[Rickster]

Charlie---that ski looks AWESOME. :Banane01: :woot:

It's just a shame that graphics kit is going to get messed up whith the SFL hood tricks!:sneaky:

[waterfreak]

Wow!!:bigeyes: :arms: Those graphics hide the scratches real well!!:27:

[kawasakit2me]

The pic doesn't do it justice. The blue is fan-freakin-tastic.
Exotic is so totally the man.

:bananalama:

[sflsurfrider]

i took the ski out for its maiden voyage today, after installing the engine, pipe, electrics, tank etc. i ran 3/4 tank in about 1.5 hrs of break-in style riding. this thing feels sweet. i have seen the light. i can diggit!

[hangtime]

The ski looks great man .:headbang:
Could Exotic put a bigger logo right down the middle of your graphics though ,You should have left that out man it ruins the look of the graphics for me

[Rickster]

The ski looks great man .:headbang:
Could Exotic put a bigger logo right down the middle of your graphics though ,You should have left that out man it ruins the look of the graphics for me

It's called representing the people that help you.:rolleyes:

[waterfreak]

It's called representing the people that help you.:rolleyes:


I think it's called sponsorship!!:rolleyes:

[Rickster]

Exactly...

[hangtime]

Exotic signs is sponsoring SFL .That's funny right there .:biggrin: :biggrin:
So that means he's getting paid to have the exotic sticker in the middle of his boat or he got the graphics kit for free ??

I like the graphics I'm just saying the "representation" is too big .

Not everyone likes the same things peeps that's why we have forums so people can express their different opinions :rolleyes:

[sflsurfrider]

The ski looks great man .:headbang:
Could Exotic put a bigger logo right down the middle of your graphics though ,You should have left that out man it ruins the look of the graphics for me

paul sponsored the graphics 100%. hes a genuine artist that creates everything that comes out of his shop unlike other "graphics companies" that use clip art or steal other peoples work and call it their own. now, had he not sponsored the ski, i wouldve had him put something else there. i wouldnt have left it blank because it wouldve been a big blank spot begging for something..... and i wasnt going to kill this ski by putting reg numbers there. i originally wanted it blank, but he said that SOMETHING should go there..... i suggested the exotic signs. he didnt argue.

[sflsurfrider]

Exotic signs is sponsoring SFL .That's funny right there .:biggrin: :biggrin:
So that means he's getting paid to have the exotic sticker in the middle of his boat or he got the graphics kit for free ??

I like the graphics I'm just saying the "representation" is too big .

Not everyone likes the same things peeps that's why we have forums so people can express their different opinions :rolleyes:


you can roll your eyes till they come out your arse. yes, paul is sponsoring me and hooked me up w/ the graphics kit. thats what a sponsorship is. maybe you think its funny but i dont see any sponsorship on any of your boats.:Banane01:

[SuperJETT]

I don't see the problem, there are people that run the hugeamongous Yamaha pitchforks logo thing and they aren't sponsored by Yamaha, then there are people that put stickers on their skis to show what parts they are running, but they aren't sponsored by those companies either.

Charlie got a great deal, Exotic gets exposure, why does anyone have a problem with that?

[hangtime]

you can roll your eyes till they come out your arse. yes, paul is sponsoring me and hooked me up w/ the graphics kit. thats what a sponsorship is. maybe you think its funny but i dont see any sponsorship on any of your boats.:Banane01:


Who the hell said I have a problem with it ,just said I don't like the graphic being right down the middle and BIG .Just personal taste .

That's cool man ,he paid for it he should have his name on it .:cool2:

[335]

Charlie you need a "plumbing fork" logo like the one in my avatar. :cool2:

[SuperJETT]

just said I don't like the graphic being right down the middle and BIG .Just personal taste .


Then you really don't have to post that, do you? If I posted negative stuff about everything I don't personally like, I'd be posting all day long. There's no point, if you don't like it fine, you don't have to broadcast that fact on the guy's thread, it works for him.

[hangtime]

Then you really don't have to post that, do you? If I posted negative stuff about everything I don't personally like, I'd be posting all day long. There's no point, if you don't like it fine, you don't have to broadcast that fact on the guy's thread, it works for him.

Excuse me ? don't give your opinion .Since when is that how forum's are run .:rolleyes:
I have the right to voice my opinion and I will continue to do so :headbang:

Sorry if I offended you SFL .I love the graphics job man .:arms: :arms:

I wonder if he has any flag checkerboard with black ,yellow and white :cool2:

[SuperJETT]

It's called not being negative on something that someone else is proud of. You know, respecting other's tastes?

I plan on trying to keep this site a positive place to be, not somewhere where you're going to get bashed for posting pics of your stuff.

Voicing your opinion is one thing, bashing other people's stuff is another.

I have the right to voice my opinion and I will continue to do so :headbang:

[hangtime]

It's called not being negative on something that someone else is proud of. You know, respecting other's tastes?

I plan on trying to keep this site a positive place to be, not somewhere where you're going to get bashed for posting pics of your stuff.

Voicing your opinion is one thing, bashing other people's stuff is another.

Your telling me not to post if I don't like it but your posting that you don't like my post .WTF.I wasn't bashing anybodies stuff .Bashing would be saying it sucked or was horrible or was nasty .
I said nothing of the sort so get off my back about it.:261: :rant: :disappointed:

[kawasakit2me]

A differing opinion has never hurt anyone... especially SFL! LOL :biggrin:

I personally think Exotic deserved that spot (or some other prominent spot) for all their efforts. They earned it. Otherwise, I'd agree with Art. :dunno:

[hangtime]

They did deserve the spot ,they designed it they did the work and paid for it ,so of course they deserve it .A mountain out of a mole hill :aargh4:

[sflsurfrider]

if paul didnt pay for the job, i wouldve had him put something different there, i admit.

maybe something like "hangtime's opinions suck":beerchug:

its all good, dude. i respect your opinion and you didnt offend me in the least. i completely understand your opinion and i realize that you didnt know that paul paid for the job when you made your original post.

back to the ski- i took it out for the second break-in tankful today then on the third, i let loose. this machine rocks!:bigeyes: no comparison to my olde square. im in love!:10:
:werd:

oh, steve, check your plug caps:rolleyes:

[hangtime]

maybe something like "hangtime's opinions suck":beerchug:




Your good :arms: :arms: You got me there :headbang:

[WaHoo_1]

great looking ski Charlie! :woot:Glad to see the culmination of lots of hard work paid off. :fing02: Can't wait to see her in person sometime. BTW, wass up with the "pee-stained" gas tank? Figured you'd know by now that's what wetsuits were made for! J/K

[sflsurfrider]

that was my "experimental" tank - i.e the internal filler. i wanna get a new oem with a black filler and billet cap cause my tank looks like ass..... but its functional!

i still pee in the wetsuit. dont worry

[335]

that was my "experimental" tank - i.e the internal filler. i wanna get a new oem with a black filler and billet cap cause my tank looks like ass..... but its functional!

i still pee in the wetsuit. dont worry

Charlie---I have the original gas tank from my 2004 Superjet---It's not brand new, but better than your current. Let me know if you are interested and I'll get you some pictures.

[sflsurfrider]

Charlie---I have the original gas tank from my 2004 Superjet---It's not brand new, but better than your current. Let me know if you are interested and I'll get you some pictures.

yeah, please send some picstuers, chickstuer!

[damnthathurt2]

Charlie ... ski looks sweet as hell ... but about that big exotic signs logo on the side ..... ah hell it rocks the Llamas Arse too...
you riding this week at all.. I wanna see it in action

[sflsurfrider]

ill probly ride. dont know when or where just yet. too early. ask toward the end of the week.

[SuperJETT]

nice ski charlie!

funny how all the 'diehard' square guys are riding rounds after all the smack talk over the years! :spankme: :outtahere:

Yeah, and all those 750 guys are riding rounds too. (like me)

[sflsurfrider]

nice ski charlie!

funny how all the 'diehard' square guys are riding rounds after all the smack talk over the years! :spankme: :outtahere:

you mean after YOUR smacktalk.

[sflsurfrider]

new (to me. thanks, chick!) modded tank installed...

[Phill]

Looks good!