Corey LKN

[Mouthfulloflake]

So I buy this 701 61x engine, it takes a while to get to me, because he is busy with school and work.
Granted, I told him I was not in a hurry ( he had reservations over shipping on a Monday Versus the preceding Friday, I said no problem)

He got the Cashiers check 8-14, I got the engine 9-4

And it arrives, like this.

[Mouthfulloflake]

Not a big deal, I requested that he ship it on the bed plates to protect the lower parts... he did.

when I pulled on that box it fell apart, and the engine was resting on the carb/intake side ( instead of the bottom/ bed plates...) in the box, with a couple of sheets of bubble wrap.

I think that likely caused this.

Now, normally, I would claim this off to bad luck.

but in this case, I loaned out my spare carb, over a year ago!, and its new owner apparently loves meth more than me.

so I sort of needed the extra carb...

I haven't had a chance to check the compression yet, if it isn't good, that is REALLY going to piss me off.

[land_shark3]

Ouch! I've been inside a "brown" sorting facility and can easily see how this would happen. Hope it was insured. :shrug:

[thegoldenboy]

I would ALWAYS build a small crate (just a square box) out of 2x2's and ply, than put it in a cardboard box.

YES it adds weight to shipping, yes it takes 20 mins to make and yes it takes a few screws.

Its part of the program for selling a valuable part IMO. Shipping companies butcher packages, and the $20 you invested and 20 mins of time saves you many headaches with claims, and even more time holding for an agent who has a clue what they are doing.

[Mouthfulloflake]

I guess I need to buy more stuff from you?

:pat:

[oxnard111]

I trust engines being shipped in in cardboard as long as it is done properly. Any time I have done it I used the hard styrofoam board sheets cut to size. Or I can imagine that if it were double boxed with packing material between the engine and the first box, and more packing material between the first box and the second, would be okay also.

[Bonzia Bob]

Yep, motors should be crated, never in cardboard. The UPS delivery guy could care less whats in the box, he just knows its heavy, and it pisses him off, therefore the round box. Sorry to see this happen.

[Big Kahuna]

many people use rubbermaid plastic boxes or coolers to ship motors in.

[Mouthfulloflake]

yep, ive shipped engines both ways, well packed in carboard, with foam, and dense cardboard sides/bottom, and ive built small crates too out of scrap lumber.

I also noticed, that both the lo and Hi adjuster screws were out almost 4 turns.

the engine was sold as " good running"

maybe Ill have time to see if it will start on the bench tonight, or maybe a compression check.

[Matt_E]

Bench test time! :biggthumpup:

Make sure you gotz ear plugs. :brap:

[2nd nature]

after hering horror stories i think id build a small wooden box. sucks you've had so many problems.

[wydopen]

I also noticed, that both the lo and Hi adjuster screws were out almost 4 turns.

.


:thinking:

[Mouthfulloflake]

ive got school/family stuff to do tonight, IF I get time I will, ive got a ratchet strap ready, and Ill pull the battery from my LBC to light it off... all my skis are still at the lake.

Ill try and get video/pics if I do this tonight.

it sort of depends on how much the kids and wife cooperate with me.

:biggthumpup:

Bench test time! :biggthumpup:

Make sure you gotz ear plugs. :brap:

[Mouthfulloflake]

my guess, it had some pipe added at one time, and NOT the right jetting?

so an effort was made to compensate with the adjusters.

Nice..



:thinking:

[wildman326]

It was my understanding that anything more than 2 1/2 turns out doesn't change do anything . . . anyone chime in here?

[flacarncycleguy]

It was my understanding that anything more than 2 1/2 turns out doesn't change do anything . . . anyone chime in here?

yep, 2 `1/2 3 turns and after that.... nadda:slap:

[Matt_E]

I think that may depend on OEM vs Retail Mikuni carb. They got different thread pitches on the adjusters.

[jeepmark4x4]

I have shipped motors and been shipped motors in regular cardboard boxes...nothing wrong with that, but for future references make sure to put like 30,000 arrows pointing up and 'fragile' or that thing is going to be thrown all over the place

[kurtwolff]

I know the ski the motor came from, it was bone stock with the exception of a B pipe and K&N filter (I actually picked the ski up in GA when SJ-John sold it). I don't know about the jetting or anything, but the ski ran great when I rode it the weekend after I picked it up. Good luck, and from what I know, the ski was only ridden as SJ-John's backup when he had it and had never been in salt before.

As for shipping, I always double-box and use lots of styrofoam/bubble wrap, have shipped about 10 motors this way with no problems. I have received motors in shoddy packaging, and luckily they were okay. SBT ships in some super solid cardboard boxes, great to re-use if you get your hands on one!

-Kurt

[cgibso14]

Finally got my part today from him, payed 8/7 delivered 9/6, stock FA all haacked to hell. NOT HAPPY

[tor*p*do]

Finally got my part today from him, payed 8/7 delivered 9/6, stock FA all haacked to hell. NOT HAPPY

bummer, post pix if you can

[Mouthfulloflake]

at least you had fast turn around time!

:noevil:

Finally got my part today from him, payed 8/7 delivered 9/6, stock FA all haacked to hell. NOT HAPPY

[keefer]

RANT ON - Man, that sucks. It is obvious that he knows little about how to properly box up something heavy that will survive shipping. As most of us know, you have to isolate the object within thick layers of some energy absorbing material that will keep it from shifting within the packaging and it must be strong enough to withstand at least 10x the weight of the object. An 80lb irregular shaped metal object with relatively sharp edges can punch through a lot more that a couple layers of bubble wrap in short order. This kid needs to get his act together before he loses all credibility with this group. There is no excuse for something arriving in this state. If he paid someone to pack this up, he needs to get his money back and reimburse you for any damages. I would be livid at this point and prolly on the road to NC for some IN YO FACE time. But thats just me.. - RANT OFF

[The Penguin]

RANT ON - Man, that sucks. It is obvious that he knows little about how to properly box up something heavy that will survive shipping. As most of us know, you have to isolate the object within thick layers of some energy absorbing material that will keep it from shifting within the packaging and it must be strong enough to withstand at least 10x the weight of the object. An 80lb irregular shaped metal object with relatively sharp edges can punch through a lot more that a couple layers of bubble wrap in short order. This kid needs to get his act together before he loses all credibility with this group. There is no excuse for something arriving in this state. If he paid someone to pack this up, he needs to get his money back and reimburse you for any damages. I would be livid at this point and prolly on the road to NC for some IN YO FACE time. But thats just me.. - RANT OFF

but I don't think anyone would ever actually be afraid of you :pokey:

[the only couch rider]

but I don't think anyone would ever actually be afraid of you :pokey:

+1 for Sean

[keefer]

You so funny, me like you long time. You go now, you been here for hours.:nutkick:

[the only couch rider]

You so funny, me like you long time. You go now, you been here for hours.:nutkick:


:laughing:

[Mouthfulloflake]

good points Keefer, and I was that mad initially.

BUT.

Ill be the nice guy here, and hope Corey makes it right to me ( and the other guys) without anyone having to get their knees broken.

But I have to admit, I had priced some flights to NC, and I was going to come out ahead, flying standby, rental car, and a couple meals, and bar tabs.

[the only couch rider]

good points Keefer, and I was that mad initially.

BUT.

Ill be the nice guy here, and hope Corey makes it right to me ( and the other guys) without anyone having to get their knees broken.

But I have to admit, I had priced some flights to NC, and I was going to come out ahead, flying standby, rental car, and a couple meals, and bar tabs.

fock the bar tab.... the champagne room man.....or the back room at lollipops in daytona :hail::Banane26::hail:

[Mouthfulloflake]

boy,
there is no sex in the champagne room!

and if there was, it would have consequences that even I couldn't live with.





fock the bar tab.... the champagne room man.....or the back room at lollipops in daytona :hail::Banane26::hail:

[the only couch rider]

boy,
there is no sex in the champagne room!

and if there was, it would have consequences that even I couldn't live with.


:thewave::bigok::thewave:

[keefer]

Yep, I am the same way, mad as hell initially but cool down once the brain kicks back in. I just hope he is reading this thread and can learn something from it. Getting in a hurry and being sloppy is easy, doing the right thing and being responsible comes with maturity. Hopefully he will get the point and do better next time.

[The Penguin]

you must be going to the wrong champagne rooms (at least that's what I've heard) :sneaky:

don't fly, don't rent a car.

drive. pay cash for everything. no paper trail :wink:

[the only couch rider]

you must be going to the wrong champagne rooms (at least that's what I've heard) :sneaky:

don't fly, don't rent a car.

drive. pay cash for everything. no paper trail :wink:

he's gotta withdrawal the cash some how..... :pat:

[The Penguin]

withdraw cash in your hometown before the trip. duh!

cash not traceable. (well, it could be)

but flying and renting cars... that's a no no

that shows premeditation :biggrin:

[the only couch rider]

withdraw cash in your hometown before the trip. duh!

cash not traceable. (well, it could be)

but flying and renting cars... that's a no no

that shows premeditation :biggrin:

not if you do it the day of and fly stand by

[mxrace200]

.....or write about it on the internet, no one ever thinks to look there, and I hear after 2 days it's gone forever.........hehehe.

[jeepmark4x4]

ooh i love the internet...but there is no possible way you can be tough on a jet ski forum, just doesn't happen. "crack some skulls" "break some knees"...i love it!

Have you tried contacting him about your issue?

[Mouthfulloflake]

not only does 'tough guy' not convey well on the intertubes, but neither does humor apparently.

break his knees, jebus, you think I would say that and be serious?

IM not in the mob.

I havent bothered contacting him.
he has not returned calls, or PMs since he cashed my check, what would make me think he would start now?

the engine runs, the carb got broke in shipping,I doubt he isnt going to do anything about it.

I feel LUCKY that he even had time in his busy life with "school and work" to find time to ship it.

this is post is just a warning to other folks thinking of dealing with him.
( for those of you that are slow, I would advise AGAINST dealing with him)

[Big Kahuna]

Wait one second, you posted negative feedback on something and you have not bothered to try to contact Corey???

Uh, that makes no sense what so ever......... If your not gonna bother to try and contact him then you dont have much room to bitch..........

[Mouthfulloflake]

I tried calling, and sending PMS, many times before the engine arrived.

you are entitled to your opinon, BUT, im tired of playing phone tag, and trying to "catch" him between classes.

he wont answer my calls at his house, the ONLY response I ever got was when his mother returned my call, ( I left a message on HER machine)

It isnt worth trying to get her involved is my point, and I feel like that is the ONLY way he would even attempt to make it right.

like I said, I dont expect him to fix it, it was BARELY worth the hassle for him to ship it to me for $670 obviously, why would I be inclined to think he would want to mess with a "cracked carb" after he got the $$$?

if he wants to deal with it, he knows how to contact me, ive left my number, ihe knows he can find me here.

my game, my ball, and I just lobbed it into his court.



Wait one second, you posted negative feedback on something and you have not bothered to try to contact Corey???

Uh, that makes no sense what so ever......... If your not gonna bother to try and contact him then you dont have much room to bitch..........

[WAB]

That is some piss poor packaging.

[Mouthfulloflake]

its my fault though WAB, since I havent contacted him about it.

I guess this thread doesnt count.



That is some piss poor packaging.

[ketsair]

its my fault though WAB, since I havent contacted him about it.

I guess this thread doesnt count.

duchebag :wavey: :sneaky:

[Big Kahuna]

Hey Mouth, I agree that the packaging was piss poor..............

my point was you said you had not tried to contact him............

I will say had you tried over the weekend he was in Nashville at the Nationals.....

send him a new PM, see if he will make it right on the carb....

[yamaslut]

a motor should always be mounted to a wood frame. End of story!!!!

That worthless, so called packing job there caused the problem, therefore he should either refund or send a new carb to ya.

Everyone knows shippers drop, slide, kick and stack their shipments around...

Coey neds to man up and do the right thing....

[Mouthfulloflake]

to lighten the mood here a bit.

here is me trying the Matt_E method of engine testing.

it DOES run.

floor test

[oxnard111]

beer in hand, just where it should be... sweet. glad it runs

[WAB]

I had to keep rewinding it to watch you jump when it fired. :09:
At least it runs!

[sjetrider]

Carefull when buying from kids, I bought a cylender from him and waited quite some time for it as well. It was poorly packaged but undamaged (cardboard box and some paper towels:bigeyes2:) .
I didnt post negative because I knew what I was getting into when I bought from him. He is after all a kid, I played the risk on the $75.00 and was obviously willing to loose but hoping to WIN.:fing02:

[yamaslut]

Carefull when buying from kids, I bought a cylender from him and waited quite some time for it as well. It was poorly packaged but undamaged (cardboard box and some paper towels:bigeyes2:) .
I didnt post negative because I knew what I was getting into when I bought from him. He is after all a kid, I played the risk on the $75.00 and was obviously willing to loose but hoping to WIN.:fing02:


damn young "whiper snappers"
(picture an old guy shaking his fist at the sky)

[Idok]

damn young "whiper snappers"
(picture an old guy shaking his fist at the sky)



i remember when you could buy a hershey for a NICKEL!

[oxnard111]

damn young "whiper snappers"
(picture an old guy shaking his fist at the sky)

when people cut me off in traffic, instead of giving them the bird, I give them "the old man fist".

[sjetrider]

Dats right and old guy & a:afro: too Nick LOL
He is after all half my age geeez I am old. :27:

[Big Kahuna]

Carefull when buying from kids, I bought a cylender from him and waited quite some time for it as well. It was poorly packaged but undamaged (cardboard box and some paper towels:bigeyes2:) .
I didnt post negative because I knew what I was getting into when I bought from him. He is after all a kid, I played the risk on the $75.00 and was obviously willing to loose but hoping to WIN.:fing02:

I know some old guy you bought a pivot bolt from that still has it in his truck...................................

:flowers1::flowers1::flowers1::flowers1::slap::sla p::stooges::argue::argue:

[Mouthfulloflake]

I did not know the guy was 16 years old when I sent the check.

i WOULD NOT have sent a check.

I told his mother on the phone, I was 16 once too, I want no part of that sort of deal.

regardless.

engine = runs

midshaft= noisy

Carb = fawked






Carefull when buying from kids, I bought a cylender from him and waited quite some time for it as well. It was poorly packaged but undamaged (cardboard box and some paper towels:bigeyes2:) .
I didnt post negative because I knew what I was getting into when I bought from him. He is after all a kid, I played the risk on the $75.00 and was obviously willing to loose but hoping to WIN.:fing02:

[Moondance]

I had to keep rewinding it to watch you jump when it fired. :09:
At least it runs!Yep...I expected him to be stuck to the ceiling like in the cartoons:Banane13:

[Mouthfulloflake]

I hate yall.
so very, very much.

hahahaha

[Moondance]

I hate yall.
so very, very much.

hahahahano you don't....you wouldn't have any non-homo friends if it wasn't for us:poke:

[wydopen]

need a carb??..i got one..ill lend it to ya...you pay shipping

[Mouthfulloflake]

I appreaciate that offer wydopen.

but, I have a plan that I think will work.

thank you though, seriously.




need a carb??..i got one..ill lend it to ya...you pay shipping

[sjetrider]

I know some old guy you bought a pivot bolt from that still has it in his truck...................................

:flowers1::flowers1::flowers1::flowers1::slap::sla p::stooges::argue::argue:

Geez old man tape a note to your shirt to ship it already LOL.

[Big Kahuna]

Geez old man tape a note to your shirt to ship it already LOL.

Hey Brian, It going out today......

But I would bet that it will still beat some stuff that you are still waiting on!!!!

Sorry about that............

[Mouthfulloflake]

since we havebeen talking about everything under the sun on this thread.

check this out, noticed last night, this cracked carb, is modified from stock.

it is bored so big, holes developed in the side from the casting in the pic.

its 54mm at the top

[the only couch rider]

that must be one of those top secret full spectrum 54mm taper bore carbs

[Mouthfulloflake]

here I marked the holes.

seems like a race ( high rpm) type of mod.
I thought loosing the bombsite made these perform poorly on the bottom end?

[Mouthfulloflake]

is that a joke, or a vague reference to something actually relevant?



that must be one of those top secret full spectrum 54mm taper bore carbs

[Endo]

Please tell me the pink ty-wrap was already on there.......and it isn't yours.

[Mouthfulloflake]

thats a previous owner addition man.
You should see the rainbow sticker on the flywheel cover!


Please tell me the pink ty-wrap was already on there.......and it isn't yours.

[the only couch rider]

is that a joke, or a vague reference to something actually relevant?


it was a joke you would need a massive motor to run something that big

[Matt_E]

So, did Corey contact you yet? :dunno:

[Mouthfulloflake]

Nope.

IM not holding my breath.

and really, im not mad, in thegrand scheme of things, it isnt terrible.

just pretty, umm, non-respectable.



So, did Corey contact you yet? :dunno:

[Matt_E]

I just shipped a 650 longblock (with exhaust) from WA to MI last week.
I put it into a plastic tub, and taped it up with 10 boxes or so. :haha:

I didn't have a box the right size, so I had to tape-make one.
Guy got it yesterday and was happy.
T'was 83lbs and cost $65 to ship via FedEx Ground with 400 bucks insurance.

[WFO Speedracer]

I have gotten engines shipped in packing peanuts before,no tape over the exhaust or intake just thrown in a box and jammed full of packing peanuts.I also received a seadoo hood that they just taped cardboard over and shipped it,it was destroyed in shipping.Some people just either don't care or don't know any better I guess.:hitwithrock:

[wydopen]

I have gotten engines shipped in packing peanuts before,no tape over the exhaust or intake just thrown in a box and jammed full of packing peanuts.I also received a seadoo hood that they just taped cardboard over and shipped it,it was destroyed in shipping.Some people just either don't care or don't know any better I guess.:hitwithrock:

i got a bottom end in packing penuts..that was hard enough getting it clean..i cant image a complete motor :bigeyes2:..you guys remember that hood i got off ebay??..it was just wrapped in pallet wrap..no box..somehow it made it here ok..lol

[oxnard111]

i got a bottom end in packing penuts..that was hard enough getting it clean..i cant image a complete motor :bigeyes2:..you guys remember that hood i got off ebay??..it was just wrapped in pallet wrap..no box..somehow it made it here ok..lol

that hack job of shipping was priceless...

[njfl]

I shipped a 701 yesterday and just used a box, but I cut 1/4" luan plywood to teh sizes of the sides of the box to distribute the load an prevent any edges from coming through.

[WFO Speedracer]

Yeah next time I ship an engine I am just going to wrap it in saran wrap and put a fragile tag on it,

[wydopen]

Yeah next time I ship an engine I am just going to wrap it in saran wrap and put a fragile tag on it,

:Banane09:

[the only couch rider]

shipping an engine.....

-wrap in plastic bag sprayed with fogging oil.
-seal bag
-place bag in box large enough to accomadate engine
-pour expanding foam around engine
-seal box
-ship to buyer


little excessive but pretty guarantees it will get there in one piece

[Matt_E]

If you're going to spray foggin oil in there, you better make DAMN sure the bag ain't leaking.
If the shipper finds oil coming from the box, they will most likely stop shipment.

[the only couch rider]

If you're going to spray foggin oil in there, you better make DAMN sure the bag ain't leaking.
If the shipper finds oil coming from the box, they will most likely stop shipment.

hence the reason i said seal the bag..... use something like the industrial paper shredder bags or something like a 2-3 mill bag

[112motorsports]

Packing Peanuts should be banned. They make a mess out of anyting weither it be a jet ski part or a simple picture.

[yama_freak615]

i've bought from corey before

never had a problem

just my 2 cents

[Mouthfulloflake]

You were lucky.



i've bought from corey before

never had a problem

just my 2 cents

[yama_freak615]

You were lucky.

not to say anything but i'm also pretty cool with corey

but i'm sure he wasn't prepared to send a motor

and big pieces of foam would work too.

thats how SBT sends their's out and the show up to us fine.

if you want i'll try to call him and see if he wants to make it right.

[tor*p*do]

Corey was on here last night pimpin a hull, post 900:shrug:
http://www.x-h2o.com/showthread.php?t=10412&page=45
he should respond to a PM. .. . . . ???

[Matt_E]

n
and big pieces of foam would work too.

thats how SBT sends their's out and the show up to us fine.





Err??? SBT uses liquid expanding foam. They start with a box, drop some foam in (In plastic bags), then drop the engine in, then drop more foam in.
That is a nearly foolproof shipping method.

A poorly taped box with a few pieces of foam is a very far cry from that. :bigok:

[yama_freak615]

Err??? SBT uses liquid expanding foam. They start with a box, drop some foam in (In plastic bags), then drop the engine in, then drop more foam in.
That is a nearly foolproof shipping method.

A poorly taped box with a few pieces of foam is a very far cry from that. :bigok:

well i was unaware of what type of foam

i just knew they used foam that had grey plastic on it

and i didn't mean just throw the foam in there

[Matt_E]

What's so nice about is that the foam expands around the motor (or whatever is in the box) to leave no wiggle room.

[yama_freak615]

true but a crate isn't always needed

i will call him later and see what i can find out for you if you wish

[Matt_E]

Bah, I have no horse in this. :bigok:

[yama_freak615]

Bah, I have no horse in this. :bigok:

i meant mouth full of lake

:fingersx:

[Mouthfulloflake]

I can vouch for the fact that he wasnt prepared to ship an engine.

Feel free to call him, Ill hold my breath until I hear from him.

Oh, maybe I shouldnt do that.



not to say anything but i'm also pretty cool with corey

but i'm sure he wasn't prepared to send a motor

and big pieces of foam would work too.

thats how SBT sends their's out and the show up to us fine.

if you want i'll try to call him and see if he wants to make it right.

[Big Kahuna]

you might turn blue.

[Mouthfulloflake]

might that increase my chances with Smurfette?

you might turn blue.

[Big Kahuna]

might that increase my chances with Smurfette?

roflmao

[ketsair]

might that increase my chances with Smurfette?

:haha: not after she busted you & papa smurf>>>>>> MR Blue lips........

[Mouthfulloflake]

DUDE!

thats funny!

First you drank a beer with me, and now you are stooping to homo-erotic humor.

SWEET!

whats next the strip club?



:haha: not after she busted you & papa smurf>>>>>> MR Blue lips........

[yama_freak615]

talked to corey

said that crack has been there and he ran it just like that in all his comps, etc.

he said it just leaked a little gas

dont complain to me if you have something to say, i'm just relaying the message

[Moondance]

talked to corey

said that crack has been there and he ran it just like that in all his comps, etc.

he said it just leaked a little gas

dont complain to me if you have something to say, i'm just relaying the messagePoint is...he should be talking to Matt about it, not you.

[Gainera2582]

talked to corey

said that crack has been there and he ran it just like that in all his comps, etc.

he said it just leaked a little gas

dont complain to me if you have something to say, i'm just relaying the message

Well tell his butt to come in here and post it up instead of hiding.

[the only couch rider]

he's probably left for wavedaze already

[Matt_E]

He was posting last night. :biggthumpup:

[Moondance]

He was posting last night. :biggthumpup:
He was also on this morning.

[yamaslut]

man... this kid is a lame ass for blowing you off... I would be ********ing pissed at the POS

he has been on this site tons and simply won't adress the situation... That makes him look guilty...

Has he returned any of your calls or PM's???

SO his buddy says it was cracked before he sold it to you... That's even worse than it getting busted up in transit...

[yama_freak615]

Point is...he should be talking to Matt about it, not you.

honestly i don't care what the point is

i was trying to help

what he does is something i don't control

[Moondance]

honestly i don't care what the point is

i was trying to help

what he does is something i don't controlSo if you don't care, why are you in the middle of it. Besides, I asked you two weeks ago if you had Corey's number & you told me you didn't have it anymore. It becomes sad when someone has to call a kid's mom to get anything done. One of these days you'll learn that.

People don't like being lied to.

[yama_freak615]

i didn't have it in my phone at the time but i had it on a back up cd for my computer when i first sent it off to a guy my grandfather knew

i used that cd in the HP and i had a list of numbers in there

sorry for trying to assist

i'm not in here to start something

but i've always had good service out of corey and was trying to resolve the problem

if he doesn't want to talk to the guy i can't help that

[yamaslut]

moral of the story:

don't deal w/ immature punks who have to get there mom or stupid immature friends to talk for them, becuase they are to pussified to
man up to a situation...

I guess we know why he didn't man up... he's still a boy...

[Moondance]

moral of the story:

don't deal w/ immature punks who have to get there mom or stupid immature friends to talk for them, becuase they are to pussified to
man up to a situation...

I guess we know why they he man up... he's still a boy...:fing02:

Very well put.

[yama_freak615]

moral of the story:

don't deal w/ immature punks who have to get there mom or stupid immature friends to talk for them, becuase they are to pussified to
man up to a situation...

I guess we know why he didn't man up... he's still a boy...

dont sit there and talk crap about me when you don't know me

i saw this thread was about one of my friends and tried to justify it

having you sit there and call me immature and stupid is something you haven't the right to do

you don't know me

i have done nothing in this situation to show that

i was trying to fix it so corey wouldn't get a bad rep but who cares i guess now

starting crap like this is the reason alot of the big guys in the sport don't post

i'm ending this here, it's pointless to sit here and argue through typing

[the only couch rider]

dont sit there and talk crap about me when you don't know me

i saw this thread was about one of my friends and tried to justify it

having you sit there and call me immature and stupid is something you haven't the right to do

you don't know me

i have done nothing in this situation to show that

i was trying to fix it so corey wouldn't get a bad rep but who cares i guess now

starting crap like this is the reason alot of the big guys in the sport don't post

i'm ending this here, it's pointless to sit here and argue through typing


who do you consider a big guy in the sport?

[yama_freak615]

who do you consider a big guy in the sport?

how often do you see malone or stoyer on here

and even the companys

you don't see blowsion posting

theres to much drama

btw

this is my last post in this thread

[The Penguin]

dont sit there and talk crap about me when you don't know me

i saw this thread was about one of my friends and tried to justify it

having you sit there and call me immature and stupid is something you haven't the right to do

you don't know me

i have done nothing in this situation to show that

i was trying to fix it so corey wouldn't get a bad rep but who cares i guess now

starting crap like this is the reason alot of the big guys in the sport don't post

i'm ending this here, it's pointless to sit here and argue through typingthe only one who can fix that is Corey.

[yamaslut]

dont sit there and talk crap about me when you don't know me

i saw this thread was about one of my friends and tried to justify it

having you sit there and call me immature and stupid is something you haven't the right to do

you don't know me

i have done nothing in this situation to show that

i was trying to fix it so corey wouldn't get a bad rep but who cares i guess now

starting crap like this is the reason alot of the big guys in the sport don't post

i'm ending this here, it's pointless to sit here and argue through typing

Let me get this straight...you are saying you don't think its stupid to become a middle man in a bad situation that happens to be none of your buisness???? You let Cory handle his problems, he's a big boy... I think you were trying to be the "nice guy", but that's really not helping... What did you accomplish??? NOTHING.... I apologize for calling you immature, but your actions were...

[Gainera2582]

coreylkn Last Activity: 09-14-2007 05:23 PM


So he has enough time to log on this site, but is letting someone else give a response rather than sucking it up and fixing the problem?

[Superjet Geoff]

dont sit there and talk crap about me when you don't know me

i saw this thread was about one of my friends and tried to justify it

having you sit there and call me immature and stupid is something you haven't the right to do

you don't know me

i have done nothing in this situation to show that

i was trying to fix it so corey wouldn't get a bad rep but who cares i guess now

starting crap like this is the reason alot of the big guys in the sport don't post

i'm ending this here, it's pointless to sit here and argue through typing


I understand your intentions bro, I'm a young'in myself, but even if Corey is your friend, theres no justification for the immature and disrespectful way he has handled this situation.

By blindly throwing yourself in his corner, of course you're going to catch some heat.

If you were really trying to help you would try to get Corey to take some action, not act as 6th grade note-passer.

my $.02

[the only couch rider]

how often do you see malone or stoyer on here

and even the companys

you don't see blowsion posting

theres to much drama

btw

this is my last post in this thread

stoyer rarely posts on any forum and i don't think since i have been in this sport which is going on 10 years i have seen malone post.

and you don't see blowsion, yeah you also don't see factory pipe, novi, ada, full spectrum, umi, the list goes on and on posting either.

the world does not revolve around the interweb as most people think........


if your friend is out to hang himself, let him tie his own noose and hang... the only thing you did by getting involved was make yourself look like an ass

[Mouthfulloflake]

Yama-Freak,

THANK you for trying.

He did send me a PM about the cracked carb.

it basically said:

It was cracked the whole time I had it, It slipped my mind when I was selling you the motor, so what do you want me to do about it?

so, Corey, id trade this cracked carb for a stock carb ( in the same working condition) if you want.

the only aspect that bothers me about the carb is the leak gas thing, I dont mind the shoddy taper bore, really, I just dont like gas leaking in my hull.

[335]

I just dont like gas leaking in my hull.

Can't understand why not...:dunno: :firedevil::angryfire::firedevil:

[ketsair]

I just dont like gas leaking in my hull.

ya, i thought you were used to that by now.....???

[flacarncycleguy]

ya, i thought you were used to that by now.....???

it helps keep it clean :wavey:

[ketsair]

it helps keep it clean :wavey:

that may also be the reason for the no smoking sign???????

[sjaholic]

hey matt sorry i let the wifey know about this purchase! did she knock you out after i left?

[Mouthfulloflake]

haha.

no problem other matt.

she asked why I need ANOTHER motor.

so I had to explain her boat has a 701, mine and sons only have wimpy 650s, she felt so badly that she over looked the un-mentioned purchase.

You are however, cut off from beers on my dock when she is around.

bwwhahahahaha



hey matt sorry i let the wifey know about this purchase! did she knock you out after i left?

[Geeshow]

sorry about before, I feel really bad for you, Know wonder why you are pissed off. Corey hasnt been on the site since.

[Idok]

I think a refund to the tune of 75-100 dollars should cover it...

simple enough

[Gainera2582]

Corey hasnt been on the site since.

Coreylkn Last Activity: 09-18-2007 09:36 PM


:clown:

[Mouthfulloflake]

He offered to refund $50 ( like in the last hour), I said thats fine.

when it gets to my paypal, I will consider this issue closed.

[Superjet Geoff]

only took 2 weeks.:boggled:

[kurtwolff]

I think some JB Weld will solve your issues now that the refund is in order, no more leaking fuel!

[Mouthfulloflake]

money is there, deal is done.

Thanks Corey, and thank your mother for me.

[tor*p*do]

money is there, deal is done.


how is that motor running?

[pimpchevy07]

on 8/5/07 i paid $20 for a purple rn front trim piece. he kept telling me he is going to ship it. i still have received nothing and he does not answer my pm's. i have spent over $5,000 buying new and used stuff on line and this is the only item i havent received.

[WAB]

lovely :nono:

[Mouthfulloflake]

Ive not installed it yet, only ran it on the floor.

the electronics all work ( haven't checked charging system though) but inside the E box is a a little crusty. they will clean up and make great spares though.

the engine has good compression, so Ill drop it in my boat whenever i have time , hopefully soon, and check it out.

I think it will be fine.





how is that motor running?

[jeepmark4x4]

on 8/5/07 i paid $20 for a purple rn front trim piece. he kept telling me he is going to ship it. i still have received nothing and he does not answer my pm's. i have spent over $5,000 buying new and used stuff on line and this is the only item i havent received.


What the H have you spent 5 grand on?

[pimpchevy07]

ive spent alot more than 5 grand. buying skis, a motor, pipes, hood kit, handlepoles, pumps, impellars, carbs, and tons of other parts. that sh@t adds up fast. its cool though. he finally pm'd me back and has agreed to give me a refund. he hasnt refunded me yet, but im sure he will.