Jetting for OEM 44's

[S&Ssuperjets]

Im putting them on a 61x 701 with a sport port done on it and a B pipe . Also MSD enhancer with 180 on the compression .. Thanks for any help .. :rolleyes:

[waxhead]

easy
120 low
100 high
2.3 n/s
80gram spring

[S&Ssuperjets]

Thanks waxhead I give that a try ...

[Big Kahuna]

is that 61x cases or 62t cases?

[waxhead]

i was thinnking the same thing
but he said oem so i figured it was 62t

[S&Ssuperjets]

No it 61x case sorry about that ..

[Big Kahuna]

hey Wax, I not sure about the jetting using x cases......... not up my ally....... should be fine with what wax gave you, would think a little rich......... what type of power are you wanting? If bottom to mid, a single setup may be the best way to go........ but who knows.......

[waxhead]

oh i see
so what were they off
a 760 ??
or two single 701 carbs

[waxhead]

1x cases
i found i had to go one leaner on top
and one richer down low
i would try 125 lows and stick with your 100 high and see how you go

[S&Ssuperjets]

bottom to mid power . Not sure what that came off of but I'm putting them on a Riva intake ..

[Big Kahuna]

what kinda porting are you running?

[Matt_E]

Sport port....a little bit of intake restriction removed, and exhaust slightly widened. Very mild.

[S&Ssuperjets]

yea I cleaned the intake transfers up .Ported and polished the exhaust ports .Also got some seed stuffer But not sure if I'm going to put them in . Oh and some Bad bones reeds ..