Huge parts list, need to clean out shop!

[kurtwolff]

I have a shop full of parts, I would like to clean these parts out, make a fair offer and we can go from there. I know lots of you are doing winter builds and need parts. I use Paypal and ship quick via USPS Priority or Parcel Post, depending on your wishes. I will try to get pictures up tonight, there will be ALOT!


650 cylinder-ok bore
650 cylinder-ok bore
650 cylinder-ok bore
650 group k cylinder-nice bore/hone-with wisecos 1st over
701 62t cylinder-ok bore, 2 used stock pistons/rings
701 62t cylinder-ok bore
701 61x cylinder-ok bore


701 61x core crank
701 61x core crank
701 62t core crank
701 61x good crank


701 61x cases
701 62t cases-no inserts, virgin
701 61x cases
701 61x cases
650 cases

701 61x stock head
701 MRD girdle head-no girdle kit, needs new o rings
650 stock head, ok shape, little rash on it

701 61x bedplates
701 61x bedplates
701 62t bedplates


701 61x flywheel cover
701 62t flywheel cover
701 61x flywheel cover


701 61x starter-little rust, works great
701 62t starter- nice shape, no rust. works great

701 61x intake/reeds/sbn 44/KN filter
701 61x intake/reeds
701 62t intake/reeds/dual 38s- throttle plates stick, may need rebuild
701 61x 44 carb-KN filter-adapter


650 lightened flywheel/stator
650 flywheel
701 61x flywheel/stator
701 62t flywheel/stator - stator needs rebuild, flywheel is decent
701 62t stator-brand new
701 62t stator-used
701 62t stator - cut wires, looks mint

701 61x complete electrical box
701 62t electrical box for parts

701 61x complete motor-protec pipe, protec head, 44 mikuni, stator, starter, ready to drop in - set up for Blaster, could sell for the right price

62t motor from 2004 XL700, has....

701 62t cases
701 62t good crank
701 62t head
701 62t bedplates
701 62t flywheel
701 62t flywheel cover
701 62t starter

[CoreyLKN]

:bigeyes: Thats quite the collection of parts. Maybe jay(i think) that wants to buy my hull will see this. The hull will need a motor.:biggthumpup:

[kurtwolff]

ya I told him that I have parts, and that I am parting out 3 Yama sitdowns right now so I have lots.

Forgot to mention that I also have HUNDREDS of Yamaha bolts from parting out skis, etc; any bolts or little pieces that anybody needs, I most likely have.

[primetime1267]

Price plz for the:
701 61x complete motor-protec pipe, protec head, 44 mikuni, stator, starter, ready to drop in - set up for Blaster, could sell for the right price

[hangtime]

I can hear the vultures circling :biggthumpup:
Wait until they all get home from Christmas visits

[robertg]

How much for the 62T stator with the wires cut? I would like to have a spare. How long are the wires?

[vomitspot]

price on 61x cylinder and stator please
jason

[botizzle]

your inbox is full :cool2:

[DrewNJ]

I could use a set of T-handles for both my lows and highs for a pair of sbn 38's if you have them.

[SkiDaddy]

Dibs on "701 62t starter- nice shape, no rust. works great" and "701 61x cylinder-ok bore"

PM sent, but Inbox is full.

[feartheride]

whats the deal with the blaster motor more detail,is it stock bore ported ect.

[Idok]

kurt...how muchie you want for enough bolts to do a complete motor?

[kurtwolff]

Sorry about my inbox, I just cleaned it out. If you sent a PM previously, feel free to send another.

As for parts....

Scum has dibs on the following, emailed at 6:30 am....
61x cylinder
62T case
61X case

robertg, as for the stator w/cut wires, I need to test it, came from running motor. Sjetrider said he needed parts from it, and I need to test it for him, so pending that, we will go from there. I do, however, have a 62t stator that is ready to go, uncut wires, nice shape. PM me, maybe we can make a deal.

SkiDaddy, you are welcome to the starter that has a bit of rust, but it isnt bad. YAMA CAT has dibs on the one w/ no rust. PM me about it.

Idok, PM me with what bolts you need. I guess you need bolts for cases, bedplates, cylinder base, cylinder head, and intake, and exhaust? We can go from there.

Sorry for the confusion, and I will get pictures up as soon as I can lay all them out on my table. Thanks -Kurt

[cambo au]

got a set of 44s

[thegoldenboy]

pm'd

[GDFL]

Dibs on new stator. How much?

[Rickster]

How much shipped to 33324?

650 lightened flywheel/stator
701 61x flywheel/stator

[YAMA CAT]

Thanks again Kurt! I just sent you some dollars :purr:

[masterblaster]

how much for the 61x elec box

[112motorsports]

I have dibs on the engine. If you could please post some pics and or send them to my e-mail I would greatly appreciate it. Thanks vaio112@yahoo.com

[The other Alex]

Does anyone know if that 61x carb is too big for a 6m6 motor?
If it'll work I'll take dibs on that.

[dirtriderx99]

If masterblaster didn't get the 61x electrical box, I've got dibs.

[feartheride]

whats the deal with the blaster motor more detail,is it stock bore ported ect.


I had posted earlier this week last looking for more info on the blaster motor but you must of missed it .Can you send more info
Paul
Your inbox is full

[arqpablo]

Hi Sir;
Do You Have The Original Intake For Super Jet (twincarb)?
Ok.
Thx.
Pablo.

[CoreyLKN]

Kurt, i may be interested in a set of 62T cases. Think im gonna run 62T/61X motor. gimmie a shout later if you still got a set and maybe we can work out a deal.

[kurtwolff]

Ok, here are all the pictures of what I have now. I am going back to school tomorrow sometime, I can ship out tomorrow if I get payment on items, but it will be at least two weeks until I come home again and will be able to ship more. My Paypal is kurtwolff@gmail.com, you can also reach me at that email easier than PM. All prices are shipping included, via USPS Parcel Post unless buyer wants Priority. If you are going thru the area to Daytona, I am 5 minutes off I-77 on Lake Norman.

-Crank from an '04 62t motor, good conditon, all bearings are smooth - $200
-62t cylinder from '04, stock bore, bore looks good - $150
-62t cylinder, stock bore, one hole has some scratches but had 135lbs - $125
-62t cylinder, stock bore, also has some scratches - $125
-61x cylinder, stock bore, scratches in one hole but not too deep - $150
-61x cases, painted black, good shape - $100
-61x cases, had a rusty crank in it, but look good - $100
-62t cases, bottom case has some corrosion, top case is decent. - $175
-61x intake man. reeds, Mikuni 44 SBN, Riva F/A and adapter - $115
-6m6 cases, good shape - $65
-Starter, little bit of rust, guaranteed to be good - $75
-61x intake man, reeds are rusted - $25
-62t intake man, reeds, nice shape -$55
-Dual 38s, throttle plates are stuck. - $55
-Mikuni 44 SBN, jetted for 650 w/ b pipe - $75, can include K&N if needed
-62t stator, cut wires. Mint shape, I could not test it, but is guaranteed -$60
-6m6 flywheel, mint - $40
-6m6 lightened flywheel and stator, about .5 lbs lighter than stock - $150
-750 small pin Kawi flywheel, mint. -$50
-Squarenose steering cable - $70
-Squarenose throttle cable - $40
-Squarenose rear bumper - $40
-Squarenose side rails - make offer
-Tons of misc. square parts, etc - make offers
-Squarenose nosepiece, good shape - $65
-MRD girdle head for 701, no girdle kit, dont know about dome size -$70
-61x stock head - $30
-62t stock head - $30
-81.5mm OEM piston, rings, used wrist pin and bearing if wanted -$50
-3 sets of bedplates - $30 for each set

Here is the link to pics....

http://s134.photobucket.com/albums/q96/kurtwolff/?start=all

If you want more pics of something, let me know. Thanks -Kurt

[SurfCrazed]

You said you have alot of bolts! i need the tiny bolts that bolt the exhaust mount to the cylinder maybe an inch long and 10mm big! need 2. I Also need 4 exhaust bolts for a 62T 701 cylinder (10mm) Thanks!

[ATS_Aaron]

701 62t intake/reeds/dual 38s- throttle plates stick, may need rebuild

Still got?

Aaron

[kurtwolff]

Yep, I still got em. Let me know. Thanks! -Kurt

[superjet257]

do you have reeds for 61x?
do you have any wearrings for superjet?

[blowout169]

do you still have any 62t parts

[SQUARE JOEL!!!]

This is an old thread